Panasonic SC-ZT1 User Manual

RQT9471

As this system uses a frequency band of 2.4 GHz, the 

radio waves

 may be interrupted by an obstacle. Depending on the 

surrounding environment (i.e. radio wave interruption from outside, etc.) or the building structure where this system is used (i.e. wall 
that easily refl ects radio waves, etc.), sounds may be cut or noise may occur.
Install this system properly paying attention to the following descriptions.

„ Equipment certifi cation

As this system received Technical Conditions compliance certifi cation based on the Radio Law, the wireless station license is not 
required. However, if you do the following actions to this system, you may be punished by law.
•  Disassemble or refurbish

„ Restrictions for use

•  Domestic use only.
•  Use this system in the same room.

„ Do not place an obstacle between the main unit and speakers.

Radio waves from this system reach maximum range of 15 m (49 feet) in the same room. If there is an obstacle between the main 
unit and speakers or the main unit is placed at the height of 50 cm (1.6 feet) or below from the fl oor, the radio waves reach smaller 
range.

„ Keep this system away from equipment that generates radio wave interference.

If the following equipment is located near the system, install this system away from such equipment.
•  Bluetooth, OA devices, telephone, etc.: approx. 3 m (10 feet) or more.
•  Microwave oven, wireless LAN compatible devices: approx. 3 m (10 feet) or more.

This system is designed to automatically avoid radio wave interference with such household equipment. If radio wave 
interference occurs, the Wireless Link display (

➜ 

page 14) may blink, the sounds from speakers may be interrupted or noise may 

occur.

These phenomena occur when this system selects a proper frequency. These are not malfunctions.

„ Keep this system away from metal objects that tend to refl ect radio waves.

If there are metal objects or furniture in the room where this system is installed, radio waves tend to be refl ected. Depending on the 
listening-viewing position, sounds may be interrupted or noise may occur.  These symptoms may be remedied by slightly moving this 
system’s position.
Note that radio waves tend to be refl ected also when this system is installed in rooms with a lot of activity.

„

„ Make sure to place the speakers on a fl at, stable 

„

➜

„ The speakers of this system are not magnetically 

•  Make sure the base parts are not covered by cloth such as a curtain.
• 

Before attaching the leg cushion (Included) on the base parts to 
prevent tilt or rattle on the floor, make sure there are no people in 
the surrounding area.

•  If the main unit is placed at the height of 50 cm (1.6 feet) or 

below from the fl oor, the radio waves reach smaller range.

•  Do not install other equipment directly on or under the main 

unit.

•  Set the distance from each speaker to the listening-viewing 

position. (

➜ page 22)

Front speaker 
(right)

Front speaker 
(left)

Connected equipment

Main unit

Surround 
speaker (left)

Approx.120°

Surround 
speaker (right)

5%<622 436;'PKPFF

5%<622 436;'PKPFF

ඦ೨

ඦ೨