MK Sound SW-95 User Manual

Page of 12
9
FRAMELESS IN-WALL SPEAKER
!
!
IMPORTANT! - MAKE SURE WALL ELECTRICITY IS
TURNED OFF BEFORE REMOVING THE SPEAKER !
IMPORTANT! - BE SURE THAT YOU SECURE THE LOOSE SPEAKER WIRES TO THE BRACKET  OR
THE STUD OR THEY WILL BE LOST IN THE WALL!
1. Remove the speaker grille.
2. While holding baffle, loosen screws 
sequentially until two inches of screw is 
exposed, or screw stops.   If using a power
screwdriver, make sure that it is on a low 
torque setting to avoid stripping.
2
3. Push the screws in until they are 
flush with the front of the baffle.
32. Pull bottom of speaker slightly forward 
until bottom screws rest on the drywall.
4. Pull top of speaker out
of the wall opening.
5. Disconnect wires
from crossover.
6. Attach loose wires to stud or bracket
8.
IF YOU NEED SERVICE
Contact your dealer or M&K with a complete description of the problem. Please have the unit's model and seri-
al numbers (found on the back of the cabinet), date of purchase, and your dealer's name. You can call M&K between
8:30 AM and 5:00 PM Pacific Time, Monday through Friday, at (818) 71-7010. If you call outside these hours, leave
a message, and we will return your call. Alternatively, you may send us an e-mail to service@mksound.com.
DO NOT RETURN YOUR SPEAKERS TO THE FACTORY FOR 
SERVICE WITHOUT OBTAINING PRIOR AUTHORIZATION.
9.
M&K 10 YEAR WARRANTY
All M&K speakers (except for subwoofers) carry a ten year limited parts and labor warranty. This warranty is trans-
ferable to new owners. It does not cover abuse, misuse, repairs by unauthorized service stations, speakers without
serial numbers, and those damaged in shipping or by accident. If you have any questions about the warranty, please
contact M&K.
10.
REMOVING THE SPEAKER FROM THE WALL
Follow these steps to remove your M&K in-wall speaker from the wall.