Manualsbrain.com
  1. Manuals
  2. Brands
  3. Phoenix Gold
  4. AST-220S
  5. User Manual

Phoenix Gold AST-220S User Manual

Download
Page of 4
With the AST 220S and the AST-Stand lying flat, attach 
the two wires together, noting that the slide-on connectors 
are sized differently to maintain proper phase in the 
connection. Now, carefully slide the metal support into the 
channel on the rear of the AST 220S. Align the four brass 
pins extending from the top of the AST-Stand with the four 
channels on the inside of the AST 220S, and slide the two 
units together so that they fit tightly against the plastic 
spacer of the AST-Stand.
Now insert and tighten the two remaining screws 
attaching the metal support to the AST 220S.
You may now connect the speaker cable to the terminals 
at the bottom of the AST 220S / Stand combination.
Connecting the Speaker cable to the AST 220 speakers
Strip away 1/2 inch of the insulation on the Speaker wire 
and tightly twist the strands of each conductor together. If
a soldering iron is available carefuly tin the two conduc-
tors of each speaker cable. 
Next, bend the exposed portion 
of the speaker cable to a 90º 
angle to the insulation. 
Press down the top of the 
terminal and insert the 
speaker cable into the hole 
at the bottom of the connector 
in the direction of the closest 
end of the connector cup.
Always be careful to observe
proper polarity, making sure to connect (+) to (+) and
connect (-) to (-). Failure to do so will cause a loss of low 
frequency response and improper imaging.
 
4
Specifications
AST 220S Home Theater Satellite
•   Plasma application "slim" wall mount design    
    loudspeaker system
•   Height 20” overall
•   Dual 4.25” mid/woofers and poly treated silk dome        
    tweeter
•   Sensitivity: 89 dB/ @ 2.83V / 1m
•   Impedance: 8 Ohm nominal
•   Frequency Response: +/- 2.5 dB from 90-20 kHz 
    (-6 dB @ 72 Hz.)
•   Recommended safe amplifier power: 15 - 200 watts         
    RMS
•   CAD/CAE designed High order, Asymmetrical, 
    Phase compensating, acoustical passive crossover
•   3.5” (90
mm
) D x 5.25” (133
mm
) W x 20.25”  (514
mm
)H 
AST 220C Home Theater Center Channel
•   Plasma application "slim" wall mount design       
        
     loudspeaker system.
•   Length 20” overall
•   Dual 4.25” mid/woofers and poly treated silk dome                
    tweeter   
                         
•   Sensitivity: 89 dB/ @ 2.83V / 1m
•   Impedance: 8 Ohm nominal
•   Frequency Response: +/- 2.5 dB from 90-20 kHz 
    (-6 dB @ 72 Hz.)
•   Recommended safe amplifier power: 15 - 200 watts      
    RMS  
                                   
•   CAD/CAE designed High order, Asymmetrical, 
     Phase compensating, acoustical passive crossover
•    3.5” (90
mm
) D x 5.25” (133
mm
) W x 20.25”  (514
mm
)H 
AST Stand Home Theater Floor Stand
•   Home Theater application "Floor Stand” for AST 220S
•   Height 47” overall
•   Matching Aluminum Extrusion
•   Floor Level Speaker Level Input 
•   3.5” D x 5.25” W x 27” H