iHome IBT24GC User Manual

iBT24

Using the

Playing Audio via Aux In

6

P10

1.  Connect the included 3.5 mm audio plug to the headphone or line-out jack on your audio device and 

the other end into the Aux-in Jack on the back of the unit. 

2. Move the Power ON/OFF Switch to the ON position (right) to listen to audio via aux in. The 

indicator light will flash blue. 

3.   Power on the audio device and use the controls on the device to play or pause audio, navigate tracks 

and control volume. If your audio device is already paired with the unit, the light will glow steadily 
blue as in Bluetooth mode, but you will hear your audio via aux-in.

4.  When done listening, move the Power ON/OFF Switch to the OFF position (left) to turn the unit off. 

Remember to turn off your audio device, too.

Playing Audio via Aux Out

You can connect the unit to an external speaker via the Aux-out jack located on the back of the unit to 
expand the audio playing in Bluetooth or Aux-In modes.
1.  Connect a 3.5 mm audio cable plug to the Aux- out jack on back of the unit and connect the other 

end to the line-in jack on your external speaker. 

2. Move 

the 

Power ON/OFF Switch to the ON position (right). 

3.   Power on a Bluetooth or aux-in audio device and use the controls on the device to play or pause 

audio, navigate tracks and control volume.  

4.  When done listening, move the Power ON/OFF Switch to the OFF position (left) to turn the unit off. 

Remember to turn off your audio device, too.