JBL 260 User Manual

The procedure for setting up the program list is as follows.
•  From Program mode, press the UTILITY button and use the PREV PG or NEXT PG 

buttons to move to the page that appears something like this:

Utility

LCD Contrast 

10

Auto EQ Plot 

RTA

Power Up Modes

PUP Program    Stored

PUP Mute 

   Current

ZC Setup

 Panel 1      None

(STORE) - EDIT PANEL

Panel 1 

   ZC-2

Boost  0dB  Cut   0dB

Output

1     3     5 
2     4     6 

Set Security Level

 Pre EQ

 Low

Set 260 Device Level

 High

 

Password

 Enter Password 

Password

 Edit High Password

 Edit Med Password 

Press Store to Change

Press Store 

Program List

 List Size        10

 List Index        1

  Program 1

Prog Change Mode

 Program List     

Prog Lock         24  

Output Jumpers

Output             1     

Setting           30  

Panel 1 

   ZC-3

Select A

No Change

Panel 1 

   ZC-4

  Switch

  No Change

1 2 3 4

<DATA> - SELECT CHARACTER
<PREV/NEXTPG> - LEFT/RIGHT:
<STORE>-SAVE/<UTIL>-EXIT

 NAME:  

R

OCK VENUE

<DATA> - SELECT CHARACTER
<PREV/NEXTPG> - LEFT/RIGHT:
<STORE>-SAVE/<UTIL>-EXIT

 NAME:  

•   Note that the arrow indicates the currently selected parameter for editing. To select 

parameters to edit from the current page, press the DATA wheel until the arrow is next 
to the parameter that you wish to edit.

•  With List Size selected, rotate the DATA wheel to set the list size. List Size is the total 

number of programs that you need to select between; the selectable options are 1-10.

•  Once the list size has been selected, press the DATA wheel. Rotate the DATA wheel 

to select Index 1, if it is not already selected. Press the DATA wheel in again to move 
down to the program selection parameter. Rotate the DATA wheel to select the program 
which you would like to appear first in your custom program list. Press the DATA wheel 
twice to move back to the List Index parameter and rotate the DATA wheel to set this 
to List Index number 2. Press the DATA wheel again, then rotate the DATA wheel to 
select which program you would like to appear second in your custom program list. 
Repeat this process for all programs which you want to appear in your custom program 
list. 

•  Once you are done creating your custom Program List you need to turn Program List 

Mode on. To do this press the NEXT PG button. The display will appear something like 
this:

Utility

LCD Contrast 

10

Auto EQ Plot 

RTA

Power Up Modes

PUP Program    Stored

PUP Mute 

   Current

ZC Setup

 Panel 1      None

(STORE) - EDIT PANEL

Panel 1 

   ZC-2

Boost  0dB  Cut   0dB

Output

1     3     5 
2     4     6 

Set Security Level

 Pre EQ

 Low

Set 260 Device Level

 High

 

Password

 Enter Password 

Password

 Edit High Password

 Edit Med Password 

Press Store to Change

Press Store 

Program List

 List Size        10

 List Index        1

  Program 1

Prog Change Mode

 Program List     

Prog Lock         24  

Output Jumpers

Output             1     

Setting           30  

Panel 1 

   ZC-3

Select A

No Change

Panel 1 

   ZC-4

  Switch

  No Change

1 2 3 4

<DATA> - SELECT CHARACTER
<PREV/NEXTPG> - LEFT/RIGHT:
<STORE>-SAVE/<UTIL>-EXIT

 NAME:  

R

OCK VENUE

<DATA> - SELECT CHARACTER
<PREV/NEXTPG> - LEFT/RIGHT:
<STORE>-SAVE/<UTIL>-EXIT

 NAME:  

•  Turn the DATA wheel to change the Program Change Mode from ‘Normal’ to ‘Program 

List’. 

•   Once your program list has been built and Program Change Mode turned on, press the 

PROGRAM/CONFIG button to exit.  

•  Now as you turn the DATA wheel, you should see only the programs which you 

assigned in your custom program list. If at any time you would like to set the Program 
List Mode back to normal, simply press the UTILITY button, go back to the ‘Prog 
Change Mode’ page and switch the mode from ‘Program List’ to ‘Normal’.

Note: The Program Lock parameter shown in the above screen shot allows you to prevent 
overwriting of certain User Programs. All program numbers from the set number and below will 
be locked and cannot be overwritten.