Fender MH412ST Leaflet

Your new Metalhead™ MH–412ST or  MH–412SL loudspeaker
enclosure is constructed from 3/4" (1.9 cm) 13-ply birch plywood and is
capable of handling 400 Watts.  Each enclosure features four 12"
(30.5cm) speakers with 54 oz (1.53 kg) magnets. MH–412 speakers
were designed to complement the Fender

®

Metalhead™ MH-500

amplifier, but they can be used with any professional quality instrument
amplifier.* Read these instructions and your amplifier manual before
making connections.

Connect each MH-412 to a speaker output jack on your
amplifier.  Use standard speaker cable (16 gauge minimum)
with 1/4" phone plugs 

.

Connect a speaker impedance total that matches your
amplifier’s minimum impedance rating for maximum power
output.  CAUTION:  Never connect a speaker impedance
load less than the minimum rating of your amplifier to
prevent damage to your equipment.  

*The Fender

®

Metalhead™ MH–500 amplifier features a SPEAKER SELECT

switch that optimizes speaker output for either a 4– or 2–ohm load:

4–ohm load =  One MH-412 speaker

2–ohm load  = Two MH-412 speakers

2282900000 (MH-412ST)
2282800000 (MH-412SL)

Four 12" (30.5 cm) steel frame drivers
1 3/4" (4.5 cm) voice coils
54 oz (1.53 kg) magnets

3/4" (1.9 cm) 13-ply birch plywood

99 dB, 1 Watt - 1 Meter

400 Watts

4

Ω

1/4" High Current Input Jack

V

B

=  5.5 ft

3   

(155 L) (MH-412ST)

V

B

=  5.1 ft

3   

(145 L) (MH-412SL)

Height:

30 in 

(76.2 cm)

Width:

30 in 

(76.2 cm)

Depth:

15 in

(38.1 cm)

106 lb   (48 kg)

A PRODUCT OF:

CORONA, CALIFORNIA  USA

Fender® and Metalhead™ are trademarks of FMIC.

© 2004 FMIC. All rights reserved.