Manualsbrain.com
  1. Manuals
  2. Brands
  3. Sony
  4. SA-NS300
  5. User Manual

Sony SA-NS300 User Manual

Download
Page of 40
18
GB
8
Select [PIN method], then click 
[Start].
An eight-digit number (PIN code) 
appears on the screen.
9
Enter the unit’s PIN code in the 
wireless LAN router/access 
point.
Tip
Refer to the operating instructions for details 
on the wireless LAN router/access point.
10
Click [OK] on the PIN code 
screen that is displayed in step 
8.
Disconnect the network (LAN) cable, 
etc., following the on-screen instructions.
The unit restarts automatically, then the 
LINK indicator lights up in green when 
the connection is made.
Note
Perform the process again from step 1 when the 
LINK indicator flashes in red.
Tip
You can also select the WPS push button 
configuration method in step 8.
Setting Up Wired 
Networks
Usually, the DHCP setting is set to ON when 
you connect your computer to the network.
Try the following method if you are using a 
wired network.
Set the DHCP setting of your computer to ON 
in advance.
1
Check whether your computer 
and router are turned on.
2
Connect the unit and the router 
using a network (LAN) cable.
3
Connect the router and your 
computer using a second 
network (LAN) cable.
4
Turn the unit on.
The LINK indicator lights up in amber 
when the connection is made.
Your computer must be connected to the 
router in advance.
1
Set the DHCP setting of your 
computer and the router to ON.
2
Connect the router and the unit 
using a network (LAN) cable.
Option 4: DHCP method
Option 5: Fixed IP method
Network (LAN) cable
(not supplied)
Network 
(LAN) cable