Telex DOC02-DN9848 User Manual

 DN9848 Menu System 

 

 

6 

 

All the parameters for input and output signal processing and routing are defined via function specific 

menu pages that are displayed and edited at the programming panel shown below. As described in 

the illustration, each menu page uses a standard layout that relates the displayed parameters to the 

three DATA ENTRY encoder knobs, which are used to adjust the parameter values.    

 

When the menu page requires text entry, ‘<>’ 

indicates which knob moves the cursor left and 

right while ‘chr’ indicates which knob changes the 
alpha numeric character.     

 

When there are sub-menu pages either the left of 

right knob will be allocated to moving forward ( - - >) 

or back up ( < - -).  This will be indicated here by a 
knob icon marked L (Left) or R (Right). 

 

The DN9848 menu system is divided logically into Input, Output and Set Up menus, plus two function 

specific menus for quick access to the Store and Recall commands.  A menu map is provided at the 
end of this section for reference purposes. 

Each of the four input channels (A-D) and eight output channels (1-8) has their own set of menu 

pages, accessed and stepped through by pressing the channel’s yellow MENU ACCESS button. When you 
select a channel, its button lights to show that this channel is currently active at the programming 
panel.  In addition, all the menu pages show the channel number/letter in the top left-hand corner. 

 

The alpha numeric display,

showing the menu page for

programming PEQ1

The adjustable parameters are 
named on the top line. Current 
values are given below in 

corresponding order. 

 encoder knobs adjust 

the left, centre and right parameter values 
at the display, in corresponding order.  If 
there are only one or two parameters, only 

the active controls are lit. 

Centre knob

changes

character

Left knob

moves cursor

Right knob 

inactive 

The icon indicates

that turning the left

knob will access the

sub-menu page.