Sunfire 12 User Manual

Page of 24
User's Manual
19
SpeciÞ cations 
(Solitaire 12)
AmpliÞ er Output
1,500 watts rms (3.3 
Ω impedance)
High Cut Filter
30 Hz - 100 Hz adjustable, with a     
"Bypass" position.
Frequency Response
16 Hz - 100 Hz
Power Line Voltage
US model                                                 
   120 VAC 50/60 Hz
International model                                  
   230 VAC 50/60 Hz
Dimensions
13" x 13" x 13"
Weight
50 lbs
Finish
High gloss, black lacquer Þ nish.              
Removable fabric grill. 
Line Power Consumption:
550 watts average, at maximum continu-
ous output. 8 watts at idle.                
Output Levels:
Greater than 113 dB peak SPL (includes 
room gain) from 16 Hz to 100 Hz. Mea-
surement is one meter, anechoic.
A typical SunÞ re subwoofer can be 
ex pect ed to ‘best’ its spec i Þ ed minimum 
peak SPL by several decibels.
Total Harmonic Distortion
Typically less than 1/10 of the fun da -
men tal between 18 to 80 Hz.
Input Sensitivity for full           
output:
250 mVrms from left input with volume 
control at 0 dB, 60 mVrms volume con-
trol fully clockwise
*
0.75 Vrms from right input with volume 
control at 0 dB, 200 mVrms volume 
control fully clockwise
*
Input Impedance:
30 k
Ω for Line-Level inputs
56 k
Ω for Hi-Level inputs
40 k
Ω for XLR input, each leg balanced 
   to ground
XLR Input
Pin 1      Ground
Pin 2      Positive                                         
Pin 3      Negative
Driver: 12 inch
Extra large magnet and long throw 
me chan i cal design yield very high 
back-emf. The result is ex traor di nar i ly 
high operating efÞ ciency – that is, more 
acoustic output for each watt of input.
Internal System Gain:
50 dB from left input jack to speaker 
with volume control at 0 dB, 62 dB with 
control fully clockwise
*
40 dB from right input jack to speaker 
with volume control at 0 dB, 52 dB with 
control fully clockwise
*
 *
The SunÞ re True Sub woof er utilizes 
differential gain on the left and right 
inputs to retain both L+R and L-R 
information.
12 VDC Trigger Input
Input voltage range: 5 -18 VDC        
Impedance: approx 600 Ω                       
(20 mA @ 12 V)                                       
Removable terminal block, and one 1/8” 
Mono minijack, tip positive.