RCA S21114 Leaflet

 
 
 

 
INTRODUCTION 
Thank you for using NEUTAC 2.1 Wooden Woofer System. This high-quality 2.1 system 
amplified the optimum sound from your Video Game Consoles, CD, DVD/VCD, MP3, PC and 
other compatible audio devices. 
 
SPECIFICATION 

Model Code: S21114  
Normal Power Output (Total): 22W  
Speaker Driver Unit:  

•  Woofer: 3”4Ω10W; 
•  Satellite: 1”8Ω3W x 4  

 
Frequency Response Range:  

•  30Hz-20KHz 

 
 
Size: 

•  Woofer   111 x 230 x 185mm 

•  Satellite  62 x 69 x 168mm  

 
Power Supply Input: 

•  AC 230V/50Hz  

 
 
CONNECTION 
 
*Please make sure the system and the devices are Power off before establish any connection. 
 

Step 1.  Connect the game console to the VIDEO IN and AUDIO IN section, 

which is located at the back of the woofer by using the 1To3 RCA 
cable provided with the game console. 

Step 2.  Connect the TV to the VIDEO OUT and AUDIO OUT section, 

which is located at the back of the woofer by using the 3To3 RCA 
cable attached with the speaker system. 

Step 3.   Connect the two satellites to the woofer by using the built in cable 

on the satellites. 

 
*Please refer to Figure 1 for cable connection 

Step 1.   Connect  the  DVD/VCD  player to the VIDEO IN and AUDIO IN 

section, which is located at the back of the woofer by using the 1To3 
RCA / 2To3 RCA / 3To3 RCA cable. This cable may have been 
provided with your DVD/VCD player. 

Step 2.  Connect the TV to the VIDEO OUT and AUDIO OUT section, 

which is located at the back of the woofer by using the 3To3 RCA 
cable attached with the speaker system. 

Step 3.  Connect the two satellites to the woofer by using the built in cable 

on the satellites. 

*Please refer to Figure 2 for cable connection 

 
 
 
3.  PC/CD Player/MP3 Player/Game Boy 

Step 1.  Connect the PC/CD Player/MP3 player to the AUDIO IN section, 

which is located at the back of the woofer by using the 1To2 RCA 
cable attached with the speaker system. 

Step 2.  Connect the two satellites to the woofer by using the built in cable 

on the satellites. 

*Please refer to Figure 3 for cable connection 

 
 
 
 
 
 

 

Figure 2 

 

Figure 3 

 

Figure 1