RBH Sound SI-744 User Manual
3
Pre-wiring the Speaker
1. Unpack the speaker cabinet from the shipping box.
2. Run the speaker wires from the terminal cup to an amplifier/receiver. Choose either the
2. Run the speaker wires from the terminal cup to an amplifier/receiver. Choose either the
default dual channel setup in Wiring Diagram 1 (page 4) or the optional full-speaker
setup shown in Wiring Diagram 2 (page 5).
NOTE: The single-channel operation as shown in Wiring Diagram 2 (page 5), the
crossover switch must be toggled to the left.
Untape and flip the switch for setup as a single-channel speaker
for use in a 5.1 Home Theater (see Wiring Diagram 2 on page 5).
for use in a 5.1 Home Theater (see Wiring Diagram 2 on page 5).
Speaker Placement
(continued)
It is important for the
SI-744 speaker to be
positioned correctly, if not
placed properly there will be
a great reduction in imaging,
sound staging and overall
performance of the speaker.
Refer to this illustration for
position of the right and left
speakers. The top tweeter
should aim towards the front
of the theater.
SI-744 speaker to be
positioned correctly, if not
placed properly there will be
a great reduction in imaging,
sound staging and overall
performance of the speaker.
Refer to this illustration for
position of the right and left
speakers. The top tweeter
should aim towards the front
of the theater.
Left Speaker
Right Speaker