Yamaha RX-V467 User Manual

 

Firmware Update Procedure for RX-V467/RX-V567 

 

 
Case1  Display on the receiver “CDDA Upgrader” doesn’t change after playing the 

BD/DVD/CD player. 
 
‹  Check digital cable wiring.    Only optical or coaxial connection can be used for 

this update.    HDMI connection will not work. 

‹  Check digital out setting.    When using DVD/BD players, make sure the digital 

out is set to “PCM”.    Once update is completed, reset DVD/BD player to its 
original settings. 

‹  Check update disc.  Make sure that your CD-R/RW is finalized and created 

as an “AUDIO CD”.    (playable on any BD/DVD/CD player) 

‹  If all above are cleared, your BD/DVD/CD player may not be suited for this 

update.  Try another BD/DVD/CD player or contact your local authorized 
service center to update the receiver for you. 

 
Case2  Other unintended error occurred. 

 
‹ "ERROR" was displayed during the update 
‹  Receiver doesn't power up after the update. 

 

Solution: Try the following recovery method 

 

Step PL1.   Unplug the AC power cable of the AV receiver from wall outlet. 

 

Step PL2.   On the front panel of the AV receiver, press and hold the [INFO] button 

and keep it pressed, while you plug the AC power cable of the Yamaha 
receiver to the wall outlet. Once the front panel displays "CDDA 
Upgrader" release the [INFO] button. 

Step PL3.   Go to Step 4