Bose 25 Owner's Manual
AM187718_01_V.pdf
December 20, 2001
9
Figure 6
Connecting the speakers and the
music center
music center
L
R
TAPE IN
L
R
TAPE OUT
RIGHT
RIGHT
CENTER
OUTPUTS TO
CUBE SPEAKERS
LEFT
LEFT
FRONT
SURROUND
AUDIO
INPUT
Left front
speaker
230 V
230 V
115 V
115 V
Figure 7
Dual voltage Acoustimass module:
voltage selector switch settings
voltage selector switch settings
Figure 8
The AC power pack (model PS71
shown)
shown)
CAUTION:
Be sure to use the correct
power pack for your area.
Using the wrong one may
damage your music center.
Be sure to use the correct
power pack for your area.
Using the wrong one may
damage your music center.
Connecting the Acoustimass
®
module power cord
1. On a dual voltage Acoustimass module, the voltage selector switch is preset at the
factory. If it is not set for the proper voltage, slide it to the correct setting (Figure 7). Use
115V for North America, and 230V for Europe and Australia. In Europe, use the adapter
plug provided. If you are in doubt, contact your local electric utility for the appropriate
voltage setting.
115V for North America, and 230V for Europe and Australia. In Europe, use the adapter
plug provided. If you are in doubt, contact your local electric utility for the appropriate
voltage setting.
2. Plug the small end of the AC power (mains) cord into the module power jack.
Note:
Do not plug the power cord into a power outlet until you complete all connections.
Connecting the music center power pack
The Lifestyle
®
music center comes with either a 100V, 120V, 230V, or 240V power pack. See
Figures 1 and 8. Dual voltage models include both the PS71 and PS72 power packs.
Use only the Bose
®
power pack model specified for your area:
• Model PS71, 120V in North America
• Model PS72, 230V in Europe
• Model PS73, 100V in Japan
• Model PS74, 230V in UK or Singapore
• Model PS77, 240V in Australia
1. Firmly insert the small connector on the end of the power pack cable into the AC power
jack on the back of the Lifestyle
®
music center.
2. Make sure that the power pack reaches an AC power (mains) outlet.
Note:
Do not plug the power pack into a power outlet until you complete all connections.
Setting Up
Right-angle connector
into AUDIO INPUT
Right front
speaker
Center
speaker
Right
surround
speaker
Left
surround
speaker
Power jack
Audio
input
cable
Multi-pin connector into
SPEAKER ZONE 1
AC power pack
CAUTION:
Make sure the voltage selec-
tor switch is set correctly.
Make sure the voltage selec-
tor switch is set correctly.