Lg Electronics 47WS50MS User Manual

To use this function

- Must be displayed with various other products.

- Must be in a function that can be connected to RGB Cable by distributor and

RS-232C.

Tile mode and choose Tile alignment and set the ID of the current product to

set location.

* Only after pressing the SET button the adjustments made to the settings will

be saved.

- Tile mode : column x row ( c = 1 to 15 r = 1 to 15)

- 15 x 15 available.

- Configuration of an integration screen is also available as well as

configuration of One by one Display.

Adjusts the screen position automatically.

The displayed image may be unstable for a few seconds while the configuration

is in progress.

Moving the screen position horizontally and vertically.

Adjust the horizontal and

vertical

size of the screen taking into account the size

of the bezel.

The image is omitted by the distance between the screens to be naturally

shown.

Function to initialize and release a Tile.

All Tile setting are released when selecting Tile recall and the screen returns to

Full screen.

y

y

If Tile Mode is enabled, Smart Energy Saving and the Auto option in Energy Saving will be
disabled to provide the same picture quality as other displays.

Videos or photos stored on the USB device can be displayed on a single monitor by dividing them

into the main and subscreens.

Option

Sets the type of secondary screen.

*OFF: Disables the secondary screen.

*PIP (Picture In Picture): Displays the secondary screen in the main screen.

*PBP (Picture By Picture): Displays the secondary screen next to the main

screen.

Adjusts the position of the subscreen (top left, bottom left, top right, bottom

right) The default value is inthe bottom right.

Adjusts the size of the subscreen (Size 0-10). The default size of the PIP (Size:

0) is 480x240; the maximum size (Size: 10) is 960x540.

y

y

The Position and Size options are enabled only in PIP mode.