Sony STR-DB795 User Manual
O
ther O
p
e
ratio
ns
masterpage:Right
lename[E:\SEM_Janet\Revision2_STR-
DB795\J9040000_2148931122DB795CEL\2148931122\GB070TH_STR-DB795-CEL.fm]
43
GB
model name1[STR-DB795]
[2-148-931-12(2)]
Before you begin, make sure you’ve connected
all components properly.
all components properly.
Recording on an audio tape or
MiniDisc
MiniDisc
You can record on a MiniDisc or cassette tape
using the receiver. See the operating instructions
of your cassette deck or MD deck if you need
help.
using the receiver. See the operating instructions
of your cassette deck or MD deck if you need
help.
1
Select the component to be recorded.
2
Prepare the component for playing.
For example, insert a CD into the CD
player.
player.
3
Insert a blank tape or MD into the
recording deck and adjust the
recording level, if necessary.
recording deck and adjust the
recording level, if necessary.
4
Start recording on the recording deck,
then start playback on the playback
component.
then start playback on the playback
component.
Notes
• You cannot record a digital audio signal using a
component connected to the analog MD/TAPE OUT
jacks. To record a digital audio signal, connect a
digital component to the DIGITAL OPTICAL MD
OUT jacks.
jacks. To record a digital audio signal, connect a
digital component to the DIGITAL OPTICAL MD
OUT jacks.
• Sound adjustments do not affect the signal output
from the MD/TAPE OUT jacks.
• The analog audio signals of the current input is
output from the MD/TAPE OUT jacks.
• The signals input to the MULTI CH IN jacks are not
output from the MD/TAPE OUT jacks even when
MULTI CH IN is being used. The analog audio
signals of the current or previously used input are
output.
MULTI CH IN is being used. The analog audio
signals of the current or previously used input are
output.
• No signals are output from DIGITAL OPTICAL MD
OUT jacks when ANALOG DIRECT is being used.
The digital circuitry power is cut off to ensure
superior sound quality when “D.PWR” is set to
“D.PWR OFF”.
The digital circuitry power is cut off to ensure
superior sound quality when “D.PWR” is set to
“D.PWR OFF”.
Recording on a video tape
You can record from a VCR or a TV using the
receiver. You can also add audio from a variety
of audio sources when editing a video tape. See
the operating instructions of your VCR if you
need help.
receiver. You can also add audio from a variety
of audio sources when editing a video tape. See
the operating instructions of your VCR if you
need help.
1
Select the program source to be
recorded.
recorded.
2
Prepare the component for playing.
For example, insert a video tape you want to
record into VCR.
record into VCR.
3
Insert a blank video tape into the VCR
(VIDEO 1 or VIDEO 2) for recording.
(VIDEO 1 or VIDEO 2) for recording.
4
Start recording on the recording VCR,
then start playing the video tape or
laser disc you want to record.
then start playing the video tape or
laser disc you want to record.
Notes
• You cannot record a digital audio signal using a
component connected to the analog VIDEO 1 OUT
or VIDEO 2 OUT jacks.
or VIDEO 2 OUT jacks.
• Make sure to make both digital and analog
connections to the TV/SAT and DVD inputs. Analog
recording is not possible if you make only digital
connections.
recording is not possible if you make only digital
connections.
• Some sources contain copy guards to prevent
recording. In this case, you may not be able to record
from the sources.
from the sources.
• The analog audio signals of the current input are
output from the VIDEO 1 OUT or VIDEO 2 OUT
jacks.
jacks.
• The signals input to the MULTI CH IN jacks are not
output from VIDEO 1 OUT or VIDEO 2 OUT jacks
even when MULTI CH IN is being used. The analog
audio signals of the current or previously used input
are output.
even when MULTI CH IN is being used. The analog
audio signals of the current or previously used input
are output.
Recording