Sony MHC-FR1 User Manual
7
n
Step 3: Presetting
radio stations
radio stations
You can preset up to 40 stations, 20 for FM, 10
for MW and 10 for LW.
for MW and 10 for LW.
4
Press TUNER MEMORY.
A preset number appears in the display.
5
Turn the jog dial to select the
desired preset number.
desired preset number.
6
Press ENTER.
The station is stored.
7
Repeat steps 1 to 6 to store other
stations.
stations.
To tune in a station with a weak
signal
signal
Press TUNING MODE repeatedly until
“MANUAL” appears in step 2, then turn the
jog dial to tune in the station.
“MANUAL” appears in step 2, then turn the
jog dial to tune in the station.
To change the preset number
Start over from step 1.
Tip
The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.
you unplug the power cord or if a power failure
occurs.
1
Press TUNER/BAND repeatedly
until the band you want appears in
the display.
until the band you want appears in
the display.
Every time you press this button, the
band changes as follows:
FM n MW n LW
band changes as follows:
FM n MW n LW
2
Press TUNING MODE repeatedly
until “AUTO” appears.
until “AUTO” appears.
3
Turn the jog dial.
The frequency indication changes and
scanning stops when the system tunes in
a station. “TUNED” and “STEREO” (for
a FM stereo programme) appear.
scanning stops when the system tunes in
a station. “TUNED” and “STEREO” (for
a FM stereo programme) appear.
Preset number
3,5 6
2
1
4
POWER
AUTO
TUNED
STEREO
STEREO
VOLUME
M E M O R Y F M 1 ?
20
AUTO
TUNED
STEREO
STEREO
MHz
VOLUME
F M 1 0 0 . 5 0
20