Sony MHC-GNZ777D User Manual

Connect the video input jack of your TV 
to the VIDEO OUT jack with the supplied 
video cord.

Connect the video deck to the TV using a 
video cord (not supplied). However, do 
not connect this unit to the TV through the 
video deck. Otherwise, you may 
experience video leakage when watching 
video images from this system. Connect 
this unit directly to the TV as shown 
below.

For higher quality video images:
– Use the optional component video cords to 

connect the COMPONENT VIDEO input 
jacks on your TV to the COMPONENT 
VIDEO OUT jacks of this unit. If your TV is 
compatible with progressive format file 
signals, use this connection and set to 
progressive format (page 20).

– You can use an optional S Video cord to 

connect the S VIDEO input jack on your TV 
to the S VIDEO OUT jack of this unit.

(Except for Russian models) 
Set the color system to PAL or NTSC 
depending on the color system of your 
TV.
The default setting for color system is 
different depending on the area.
Each time you perform the procedure 
below, the color system changes as 
follows:
NTSC 

y PAL

Use the buttons on the unit for the 
operation.

Press "/1 STANDBY to turn on the 
system.

Press DVD.

Press "/1 STANDBY to turn off the 
system.

When demonstration appears, 
press "/1 STANDBY while holding 
down X.
The system turns on automatically and 
the color system is changed.
“COLOR NTSC” or “COLOR PAL” 
appears in the display.

Y

P

B

/

C

B

P

R

/

C

R

S VIDEO O

UT

COMPO

NENT VIDE

O OUT

VIDEO OUT

TV

Unit

Video deck

Do not connect 
directly