Sony MHC-RX100AV User Manual

Outputs

VIDEO/MD OUT (phono
jacks): voltage 250 mV
impedance 1 kilohms
PHONES (stereo phone
jack): accepts headphones
of 8 ohms or more.
FRONT SPEAKER:
accepts impedance of 8 to
16 ohms.
REAR SURROUND
SPEAKER:
accepts impedance of
18ohms.
CENTER SURROUND
SPEAKER:
accepts impedance of 8
ohms.
SUPER WOOFER:
voltage 1V, impedance 1
kilohm

System

Compact disc and digital
audio system

Laser

Semiconductor laser
(

λ

=780nm)

Emission duration:
continuous

Laser output

Max. 44.6 

µ

W*

*This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.

Frequency response

2 Hz – 20 kHz (±0.5 dB)

Wavelength

780 – 790 nm

Signal-to-noise ratio

More than 90 dB

Dynamic range

More than 90 dB

CD OPTICAL DIGITAL OUT
(Square optical connector jack, rear panel)
Wavelength

600 nm

Output Level

–18 dBm

DIN power output

FRONT SPEAKER:
50 + 50 watts (8 ohms, at
1 kHz)
REAR SURROUND
SPEAKER:
10 + 10 watts (16 ohms, at
1 kHz)
CENTER SURROUND
SPEAKER:
20 watts (8 ohms, at 1
kHz)

Continuous RMS power output

FRONT SPEAKER:
70 + 70 watts (8 ohms, at
1 kHz, 10% THD)
REAR SURROUND
SPEAKER:
12.5 + 12.5 watts (16
ohms, at 1 kHz, 10%
THD)
CENTER SURROUND
SPEAKER:
25 watts (8 ohms, at 1
kHz, 10% THD)

Music power output

FRONT SPEAKER:
105 + 105 watts (8 ohms,
at 1 kHz, 10%THD)
REAR SURROUND
SPEAKER:
20 + 20 watts (16 ohms, at
1 kHz, 10% THD)
CENTER SURROUND
SPEAKER:
45 watts (8 ohms, at 1
kHz, 10% THD)

Inputs

VIDEO/MD IN (phono
jacks): voltage 250 mV,
impedance 47 kilohms
MIX MIC (phone jack):
sensitivity 1 mV,
impedance 10 kilohms

Recording system

4-track 2-channel stereo

Frequency response

60 – 13,000 Hz (±3 dB),

(DOLBY NR OFF)

using Sony TYPE I
cassette
60 – 14,000 Hz (±3 dB),
using Sony TYPE II
cassette

Wow and flutter

±0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)