Sony MHC-WZ80D User Manual
T
une
r
37
GB
Other operations
To improve tuner reception
When tuner reception is poor, set CD/DVD
player power off by DVD power manage
function. DVD power is factory set to on.
Use buttons on the CD/DVD player for the
operation.
player power off by DVD power manage
function. DVD power is factory set to on.
Use buttons on the CD/DVD player for the
operation.
1
Press DVD.
2
Press
?/1
to turn off the system.
3
Press
?/1
while holding
x
.
“DVD POWER OFF” appears.
To set the DVD power on
Repeat the procedure above and “DVD POWER
ON” appears.
ON” appears.
Note
When “DVD POWER OFF” is selected, disc access
time is increased.
time is increased.
To change the AM tuning interval
(except for European and Saudi
Arabian models)
(except for European and Saudi
Arabian models)
The AM tuning interval is factory-preset to
9 kHz (or 10 kHz for some areas). To change the
AM tuning interval, tune in any AM station first,
then turn off the system. While holding x, press
?/1. When you change the interval, all the AM
preset stations are erased. To reset the interval,
repeat the same procedure. Use buttons on the
CD/DVD player for the operation.
9 kHz (or 10 kHz for some areas). To change the
AM tuning interval, tune in any AM station first,
then turn off the system. While holding x, press
?/1. When you change the interval, all the AM
preset stations are erased. To reset the interval,
repeat the same procedure. Use buttons on the
CD/DVD player for the operation.
Tips
• The preset stations are retained for half a day even if
you disconnect the mains lead or if a power failure
occurs.
occurs.
• To improve the reception, adjust the supplied
antennas or connect an external antenna.
You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
selecting a preset station, or by manually tuning
in the station.
Listening to a preset station
— Preset Tuning
Preset radio stations in the tuner’s memory first
(see “Presetting radio stations” on page 36).
(see “Presetting radio stations” on page 36).
1
Press FUNCTION repeatedly (or
TUNER/BAND on the CD/DVD player) to
switch the function to TUNER.
TUNER/BAND on the CD/DVD player) to
switch the function to TUNER.
2
Press BAND (or TUNER/BAND on the
CD/DVD player) repeatedly to select
“FM” or “AM”.
CD/DVD player) repeatedly to select
“FM” or “AM”.
3
Press TUNING MODE repeatedly until
“PRESET” appears.
“PRESET” appears.
4
Press PRESET –/+ (or
.
/
>
on the
CD/DVD player) repeatedly to select
the desired preset station.
the desired preset station.
To
Do this
Tune in a station
with a weak signal
with a weak signal
Follow the procedure described
in “Manual tuning preset”
(page 36).
in “Manual tuning preset”
(page 36).
Set another station
to the existing
preset number
to the existing
preset number
Start over from step 2. After
step 5, press PRESET –/+ (or
./> on the CD/DVD
player) repeatedly to select the
preset number you want to store
the other station.
step 5, press PRESET –/+ (or
./> on the CD/DVD
player) repeatedly to select the
preset number you want to store
the other station.
Listening to the radio
Frequency
Preset number
continued