Sony MHC-V818 User Manual
9
VOLUME
ALL DISCS
ß
n
Step 3: Presetting
radio stations
radio stations
You can preset the following number of
stations:
stations:
– 2 band model: 20 for FM, 10 for AM.
– 3 band model: 20 for FM, 10 for MW, and
– 3 band model: 20 for FM, 10 for MW, and
10 for SW.
1
Press TUNER/BAND repeatedly
until the band you want appears in
the display.
until the band you want appears in
the display.
The bands you can receive vary
depending on the model you purchased.
Be sure to check which bands you can
receive.
Every time you press this button, the
band changes as follows:
2 band model:
FM ˜ AM
3 band model:
FM n MW n SW
depending on the model you purchased.
Be sure to check which bands you can
receive.
Every time you press this button, the
band changes as follows:
2 band model:
FM ˜ AM
3 band model:
FM n MW n SW
2
3
5
4
1
(Power)
2
Press and hold + or – until the
frequency indication starts to
change, then release.
frequency indication starts to
change, then release.
Scanning stops when the system tunes in
a station. “TUNED” and “STEREO” (for
a stereo program) appear.
a station. “TUNED” and “STEREO” (for
a stereo program) appear.
3
Press TUNER MEMORY.
A preset number appears in the display.
4
Turn the jog dial to select the preset
number you want.
number you want.
5
Press ENTER/NEXT.
The station is stored.
6
Repeat steps 1 to 5 to store other
stations.
stations.
To tune in a station with a weak
signal
signal
Press + or – repeatedly in step 2 to tune in the
station manually.
station manually.
To change the preset number
Start over from step 1.
Preset number
MONO
TUNED
STEREO
MHz
kHz
VOLUME
ALL DISCS
ß
continued