Sony MHC-NX1 Manual
42
Inputs
VIDEO IN:
VIDEO IN:
voltage 250 mV,
(phono jacks)
impedance 47 kilohms
MD IN:
voltage 450 mV,
(phono jacks)
impedance 47 kilohms
MIC:
sensitivity 1 mV,
(mini jack)
impedance 10 kilohms
Outputs
MD OUT:
MD OUT:
voltage 250 mV
(phono jacks)
impedance 1 kilohms
PHONES:
accepts headphones of 8
(stereo mini jack)
ohms or more
FRONT SPEAKER:
accepts impedance of 6 to
16 ohms
16 ohms
REAR SPEAKER:
accepts impedance of 16
ohms
ohms
SUPER WOOFER:
Voltage 1 V, impedance 1
kilohms
kilohms
CD player section
System
Compact disc and digital
audio system
audio system
Laser
Semiconductor laser
(
(
λ
=780nm)
Emission duration:
continuous
continuous
Laser output
Max. 44.6
µ
W*
*This output is the value
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
measured at a distance of
200 mm from the
objective lens surface on
the Optical Pick-up Block
with 7 mm aperture.
Wavelength
780 – 790 nm
Frequency response
20 Hz – 20 kHz (±0.5 dB)
Signal-to-noise ratio
More than 90 dB
Dynamic range
More than 90 dB
CD DIGITAL OUT
(Square optical connector jack, rear panel)
Wavelength
(Square optical connector jack, rear panel)
Wavelength
660 nm
Output Level
–18 dBm
Tape player section
Recording system
4-track 2-channel stereo
Frequency response
40 – 13,000 Hz (±3 dB),
(DOLBY NR OFF)
using Sony TYPE I
cassette
40 – 14,000 Hz (±3 dB),
using Sony TYPE II
cassette
cassette
40 – 14,000 Hz (±3 dB),
using Sony TYPE II
cassette
Wow and flutter
±0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)
Specifications
Amplifier section
For the U.S. model
AUDIO POWER SPECIFICATIONS:
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
AUDIO POWER SPECIFICATIONS:
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 6 ohm loads both channels driven, from
70-20,000 Hz; rates 100 watts per channel
minimum RMS power, with no more than
0.9% total harmonic distortion from 250
milliwatts to rated output.
70-20,000 Hz; rates 100 watts per channel
minimum RMS power, with no more than
0.9% total harmonic distortion from 250
milliwatts to rated output.
North American model
Front Speaker:
Continuous RMS power output (reference)
Front Speaker:
Continuous RMS power output (reference)
130 + 130 watts
(6 ohms at 1 kHz,
10% THD)
(6 ohms at 1 kHz,
10% THD)
Total harmonics distortion
Less than 0.07%
(6 ohms at 1 kHz, 40 W)
(6 ohms at 1 kHz, 40 W)
European model
Front Speaker:
DIN power output (rated) 80 + 80 watts
Front Speaker:
DIN power output (rated) 80 + 80 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
100 + 100 watts
(6 ohms at 1 kHz,
10% THD)
(6 ohms at 1 kHz,
10% THD)
Music power output (reference)
160 + 160 watts
(6 ohms at 1 kHz,
10% THD)
(6 ohms at 1 kHz,
10% THD)
Other models
The following measured at AC 120/220/240 V,
50/60 Hz
Front Speaker:
DIN power output (rated) 90 + 90 watts
The following measured at AC 120/220/240 V,
50/60 Hz
Front Speaker:
DIN power output (rated) 90 + 90 watts
(6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
110 + 110 watts
(6 ohms at 1 kHz,
10% THD)
(6 ohms at 1 kHz,
10% THD)