Sony DK-AP8P User Manual

 

2009 September 17 

DK-AP8P_A6 02-17_US.fm

 

DK-AP8P

 

■

 

Press the ON/STAND-BY button on the main unit or touch ON/
STAND-BY pad on the remote control. The POWER and
E

 

SOUND 

 

indicator will turn on.

 

This unit consumes low current during stand-by mode. However,
please remove the batteries if the unit will not be used for a long
period of time.

 

■

 

Press the VOLUME (+ or –) button on the main unit or touch
VOLUME (+ or –) pad on the remote control to increase or
decrease the volume.

 

■

 

When the unit is turn on, the E

 

SOUND

 

 indicator turns yellowish

orange. You are now in the E

 

SOUND

 

 mode, where low bass and

high frequency are automatically adjusted according to the
volume input.
To turn off E

 

SOUND

 

, press the E

 

SOUND 

 

button on the main unit

or touch the E

 

SOUND

 

 pad on the remote control. The E

 

SOUND

 

indicator will go off.

 

■

 

If no iPod or iPhone is docked and there is no audio cable
connected to AUDIO IN terminal, the unit will enter the power
stand-by mode after 5 minutes of inactivity.

 

■

 

Touch either the ON/STAND-BY or E

 

SOUND

 

 pad for more than

one second. The ACTIVE indicator will blink twice and light up
in red, indicating that it is ready to be used.
Remote control will be inactive (ACTIVE indicator turns off) if left
idled for about 8 seconds. 
Repeat the above process in order to reactivate the remote
control unit.

 

The function will only operate once the finger is removed from
the touch pad, after which indicator will blink. 

 

Press the ON/STAND-BY button on the main unit or touch the
ON/STAND-BY pad on the remote control to enter the power
stand-by mode. The POWER indicator will turn off.