Sony CHC-P33D User Manual

Chapter 1: Setting up

Connecting the Stereo

Installing the Speakers

Inserting the Batteries

Setting the Clock

Connecting the
Stereo

Use the illustrations below to connect your
stereo.
If you want to connect any optional
components to the stereo, see “Connecting
Optional Equipment” in Chapter 6.

STEP 1

Connecting the

Speakers

For speakers installation, see “Installing the
Speakers”.

Right (R) and Left (L) satellite speakers
Connect the right speaker to the R
connectors and the left speaker to the L
connectors. Connect the grey cords with
white stripes to ‘ and the solid grey cords
to ’.

Superwoofer
Connect the superwoofer to the WOOFER
connectors. Connect the grey cord with red
stripes to ‘ and the solid grey cord to ’.

STEP 2

Connecting the

Aerials

Chapter 1:

Setting
Up

IEC standard socket
connector
(not supplied)

Insulated wires
(not supplied)

Ground wire
(not supplied)

AM loop aerial connection
Connect the supplied loop aerial to the AM
and the y terminals.

To improve the FM reception
Connect an outdoor FM aerial to the FM
75

terminal, using a 75-ohm coaxial cable

and IEC standard socket connector.

To improve the AM reception
After you connect the AM aerial, connect a
6- to 15-meter (20- to 50- feet) insulated
wire to the AM terminal. Connect the y
terminal to earth.

Important

Ground the external aerial from y terminal
against lightning. To prevent a gas
explosion, do not connect the ground wire
to a gas pipe.

FM lead aerial (supplied)*

AM loop aerial (supplied)

* Note: Extend horizontally

’

‘

’

‘

’