Sony CMT-EX5 Manual

GB

Check the settings

Press CLOCK/TIMER
SELECT on the remote, then
press ENTER/YES on the
remote. “PLAY ON?”
appears, then press ENTER/
YES on the remote.

Change the setting

Start over from step 1.

Cancel the timer

Press CLOCK/TIMER
SELECT on the remote and
press . or > on the
remote repeatedly until
“TIMER OFF?” appears, then
press ENTER/YES on the
remote.

• Do not operate the system from the time the system

turns on until the play starts (about 15 seconds
before the preset time). Otherwise the timer will not
be activated correctly.

• If you use the Play Timer at the same time as the

Sleep Timer, the Sleep Timer has priority.

• You cannot use the optional components connected

to PC/TAPE/MD IN jack as the sound source for
Play Timer.

Even if the system is off, the system consumes
power to display the clock and to stay
responsive to commands from the remote. The
Power Saving Mode is introduced to reduce the
amount of power consumed during standby.

In this mode, the clock is not displayed.

Press DISPLAY while the system is off.

The display changes as follows:

Clock display* y No display (Power Saving
Mode)

* The clock is displayed only when you have set the

clock.

The timer continues to operate during Power Saving
Mode.

You can change the brightness for the display.

The brightness level changes cyclically.

The brightness level is factory set to high.

Activate the timer

Press CLOCK/TIMER
SELECT on the remote and
press . or > on the
remote repeatedly until
“PLAY ON?” appears, then
press ENTER/YES on the
remote.