Sony LBT-DJ2i User Manual

You can listen to audio contents stored in 
the iPod on this system.

Press and hold CHANNEL A, then 
press FUNCTION +/– repeatedly to 
select “iPod 1”.
Press FUNCTION +/– repeatedly to 
select “iPod 2”.

Press HS on respective 
CHANNEL (or N

* on the 

* To play back the iPod 1, press and hold 

CHANNEL A, then press this button.

• To control the iPod connected to the iPod 1 

connector, use the buttons on CHANNEL A 

on the unit. If you want to control the iPod 

using the remote, press and hold CHANNEL 

A, then press the button you want.

• When you connect an iPod to the unit, the 

iPod is automatically turned on if the system 

is turned on.

• When placing or removing the iPod, handle 

the iPod in the same angle as that of the iPod 

connector on the unit and do not twist or sway 

the iPod to prevent connector damage.

• Do not carry the unit with an iPod set on the 

connector. Doing so may cause a malfunction.

• When placing or removing the iPod, brace the 

unit with one hand and take care not to press 

the controls of the iPod by mistake.

• Before disconnecting the iPod, pause 

playback.

• Depending on the connected iPod, you may 

not able to use m or M while playing 

video. In this case, you can fast rewind or fast 

forward by holding down l or L (or 
.

 or > on the remote).

• To change the volume level, use 

VOLUME +/–. The volume level does not 

change even if adjusted on the iPod.

• This iPod 1 and iPod 2 connector are designed 

for iPod only. You cannot connect any other 

portable audio players.

• To use an iPod, refer to the operating 

instructions of your iPod.

• Sony cannot accept responsibility in the event 

that data recorded to iPod is lost or damage 

when using an iPod with this unit.

• Some iPod operations may not be performed 

using buttons on the unit or remote.

You can control your iPod with the 
following buttons on the remote or unit.
The remote buttons are assigned to 
control functions on CHANNEL B, if you 
want to control the iPod connected to the 
iPod 1 connector, press and hold 
CHANNEL A, then press the button you 
want.

Pause playback Press HS

 

(or X on the 

remote).

Scroll up/down 
the iPod menus

Turn the JOG DIAL (or 
press 

V

/

v

 repeatedly on 

the remote).

Select a track or 
chapter of 
audiobook/
podcast

Press l or L (or 
.

 or > on the 

remote) repeatedly.

Choose the 
select item

Press ENTER (or 

b

 or 

 

on the remote).

l