Sony STR-SL7 Manual
13
Hooking Up and Setting Up the Speaker System
Performing initial setup
operations
operations
Once you have hooked up the speakers and
turned on the power, clear the receiver’s
memory. Then specify the speaker parameters
(size, position, etc.) and perform any other
initial setup operations necessary for your
system.
turned on the power, clear the receiver’s
memory. Then specify the speaker parameters
(size, position, etc.) and perform any other
initial setup operations necessary for your
system.
Tip
To check the audio output during settings (to set up
while outputting the sound), check the connection
(see page 18).
while outputting the sound), check the connection
(see page 18).
Clearing the receiver’s
memory
memory
Before using your receiver for the first time, or
when you want to clear the receiver’s memory,
do the following.
when you want to clear the receiver’s memory,
do the following.
This procedure is not necessary if the
demonstration activates when you turn on the
power.
demonstration activates when you turn on the
power.
1
Turn off the receiver.
2
Hold down ?/1 for 5 seconds.
The demonstration starts (see page 2) and
all of the following items are reset or
cleared:
all of the following items are reset or
cleared:
• All sound field parameters are reset to
their factory settings.
• All SET UP parameters are reset to
their factory settings.
• The sound fields memorized for each
program source and preset stations are
cleared.
cleared.
• The master volume is set to “MIN”.
Performing initial setup
operations
operations
Before using your receiver for the first time,
adjust SET UP parameters so that the receiver
correspond to your system. For the adjustable
parameters, see the table on page 31. See pages
13–17 for speaker settings and page 26 for
other settings.
adjust SET UP parameters so that the receiver
correspond to your system. For the adjustable
parameters, see the table on page 31. See pages
13–17 for speaker settings and page 26 for
other settings.
Multi channel surround
setup
setup
For the best possible surround sound, all
speakers should be the same distance from the
listening position (A).
speakers should be the same distance from the
listening position (A).
However, the receiver lets you to place the
center speaker up to 5 feet closer (B) and the
surround speakers up to 15 feet closer (C) to
the listening position.
center speaker up to 5 feet closer (B) and the
surround speakers up to 15 feet closer (C) to
the listening position.
The front speakers can be placed from 3 to
40 feet from the listening position (A).
40 feet from the listening position (A).
You can place the surround speakers either
behind you or to the side, depending on the
shape of your room (etc.).
behind you or to the side, depending on the
shape of your room (etc.).
When placing surround speakers to your side
When placing surround speakers behind you
Note
Do not place the center speaker farther away from the
listening position than the front speakers.
listening position than the front speakers.
45
°
90
°
20
°
A
A
B
C
C
45
°
90
°
20
°
A
A
B
C
C
continued