Sony 3-097-196-14(1) User Manual

CMT-DH5BT.GB.3-097-196-11(1)

cannot be heard on this system.
 Turn up the volume on your Bluetooth 

device first, and then adjust the volume 

using VOLUME +/ 



.

Severe hum or noise
 If there are obstacles between the 

system and your Bluetooth device, 

remove or avoid the obstacles.

 If there is equipment that generates 

electromagnetic radiation, such as a 

wireless LAN, other Bluetooth device, 

or a microwave oven nearby, move 

them away.

 Turn down the volume of the 

connected Bluetooth device.

headphones is distorted.
 Turn down the volume of the system 

using VOLUME  



. If your 

headphones have a volume control, 

also adjust the volume using the 

headphone’s volume control.

 Press DSGX 



 on the unit repeatedly 

until “DSGX OFF” appears.

 Press EQ 



 repeatedly to select 

“BASS” or “TREBLE,” and then press 

PRESET  



 repeatedly to turn down 

the level.

device?
 If you connect an unsupported USB 

device, the following problems may 

occur. See “Playable USB devices and 

Bluetooth devices” (page 115) for the 

supported device types.

 The USB device is not recognized.

 File or folder names are not 

displayed on this system.

 Playback is not possible.

 The sound skips.

 There is noise.

“Over Current” appears.
 A problem has been detected with the 

level of electrical current from the   

(USB) port 



. Turn off the system and 

remove the USB device from the   

(USB) port 



. Make sure there is no 

problem with the USB device. If this 

display pattern persists, contact your 

nearest Sony dealer.

There is no sound.
 The USB device is not connected 

correctly. Turn off the system, then 

reconnect the USB device and check if 

“USB MEMORY” appears.

The sound is distorted.
 The bit rate used when encoding the 

files was low. Send files encoded with 

higher bit rates to the USB device.