Sony CDP-CE525 User Manual

22

You can manually fade the sound in or out to prevent
tracks from starting or ending abruptly.
Note that you cannot use this effect when you use the
DIGITAL OUT (OPTICAL) connector.

During pause. 

FADE

 lights up in

the display and the 

Q indication

flashes. The play fades in.

When you want to start fading out.

FADE

 lights up in the display and

the 

q indication flashes. The play

fades out and the player pauses.

Start play fading in

End play fading out

Fading lasts for about 5 seconds. However, when you press
the FADER button during Music Scan (see page 14), the play
fades out for about 2 seconds.

You can change the fading time from 2 to 10 seconds
before fading in or out. If you don’t change it, fading
lasts for 5 seconds.

Press FADER before you start playing.
“FADE 5 SEC” appears in the display.

Press 

0/) to specify the fading time.

0/)

· P

When you record on side B, reverse the tape and
press 

· or P on the player to resume playing.

Press CONTINUE.

Select the tracks before doing the above procedure. The
player creates a program from the remaining tracks.

Set the tape length using the 

≠ AMS ± control in

Step 3.
Example: When the tape length of one side is 30 minutes

and 15 seconds
1 To set the minutes, turn 

≠ AMS ± until

“30” appears in the display, then push 

≠

AMS 

±.

2 To set the seconds, turn 

≠ AMS ± until

“15” appears in the display, then push
≠ AMS ±.

See page 18.