Sony MX750NI User Manual

G

e

ttin
g

 st
art
e

d

Connect the FM lead antenna.

Find a location and an orientation that 
provide good reception, and set up the 
antenna. Make sure the antenna is fully 
extended.

           

Keep the antenna away from the speaker 
cords and the power cord to avoid picking up 
noise.
Use a 75-ohm coaxial cable (not supplied) to 
connect the unit to an external antenna to 
improve reception.

Connect the DAB lead antenna 
(CMT-MX750Ni only).

Make sure the antenna is fully extended.

Use a 75-ohm coaxial cable with a male F 
type connector (not supplied) to connect a 
DAB external antenna (not supplied) to 
obtain higher DAB/DAB+ broadcast sound 
quality.

Connect the speaker cords.

Connect the speaker connectors to the 
SPEAKERS jacks on the unit.

Connect the other end of the speaker cords to 
the terminals on the speakers.

Set the VOLTAGE SELECTOR to 
the local power line voltage (for 
models with a voltage selector 
only).

Plug the power cord into a wall 
outlet.

The STANDBY indicator on the unit lights 
up.

WARNING 
DO NOT plug the power cord into a wall 
outlet until other connections have been 
made.

Connect a network (LAN) cable (not supplied) to 
NETWORK 

. For details, see “Setting up a 

wired network” (page 26).

FM lead antenna

or

DAB lead antenna 

or

Red 3

Insert only the 
stripped portion of 
the speaker cords.