Kenwood HM-DV6MD User Manual

Controls and indicators

Preparation section

I M

A D J U S T

Example for adjusting at 1:30PM

This unit incorporates a clock function. Be sure to adjust the correct time before using the timer function.

÷ The time display starts to blink.
÷ Press the SET/DEMO key. The hour is entered and the

minute display starts to blink.

Blinks

If there is a power failure or the power cord is unplugged then plugged in again while the power set to off (STANDBY
mode) after a timer is activated, the STANDBY/TIMER indicator blinks in amber. In this case, adjust the clock again.

Select the time display mode.

Blinks

÷ The time of the day is represented in 12-hour or 24-

hour method.

Switching the power ON

Activate the clock adjustment mode.

Enter the figure of hour.

Adjust the figure of hour by turning the

VOLUME/MULTI CONTROL knob.

Set it.

To increase
hour

To decrease

hour

Press the MODE key.

Turn the VOLUME/MULTI CONTROL knob
to select "TIME ADJUST", then press the

SET/ DEMO key.

Turn the VOLUME/MULTI CONTROL knob
to select "12 HOUR" or "24 HOUR", then
press the SET/DEMO key.

MODE

VOLUME/

MULTI CONTROL

Example for adjusting at 1:30PM

÷ If you pressed the SET/DEMO key by mistake, press

the MODE key and restart from the beginning.

÷ To adjust correct time, press the SET/DEMO key at

the same moment as a time announcement.

÷ When the STOP7/TUNING MODE key is pressed

while the power is in the standby mode, the time of the
day will be displayed for 5 seconds.

Enter the figure of minute.

Adjust the figure of minute by turning the

VOLUME/MULTI CONTROL knob.

Set it.

To increase
minute

To decrease

minute

SET/DEMO

VOLUME/

MULTI CONTROL

Clock adjustment

1 2

H O U R

P.S

Blinks

P.S