JVC UX-L5V User Manual

⁄

The connected subwoofer can reproduce the bass sounds 
recorded in front left and right channels, but cannot 
reproduce the LFE signals encoded in multi-channel 
software.
•  Before plugging the System to the power supply, make 

sure that the powered subwoofer is turned off.

@

•  When you connect a TV using a component video cord, 

you can enjoy a high quality picture by selecting the 
progressive scanning mode. To select the scanning mode, 
see page 16.

•  After connecting a TV, select an appropriate color system 

for your TV. To select the color system, see page 31.

¤

This operation is not required for Hong Kong and 
Australian models.
Use a screwdriver to slide the voltage selector so that it is 
pointing to the correct voltage in the area you are plugging 
in the unit. (See also the back cover page.)

From the powered subwoofer 
(not supplied)

Green

Red

Blue

On the front 
panel

•  When connecting with a USB cable, use the USB 2.0 cable 

whose length is less than 1 m.

•  You can connect a USB mass storage class device such as 

a USB flash memory device, hard disk drive, multimedia 
card reader, etc. to this System.

•  You cannot connect a computer to the USB MEMORY 

REC/PLAY terminal (

 ) of the System.

•  You cannot connect JVC Everio camcorder to the USB 

MEMORY REC/PLAY terminal (

 ) of the System.

•  Noise and static electricity may stop the USB mass 

storage class device sound. In this case, disconnect and 
connect the USB mass storage class device again after 
turning off the System.

•  Depending on the shape of a USB mass storage class 

device connected, you cannot open or close the disc tray 
properly. In such a case, use a USB extension cable (not 
supplied) to connect.

On the front 
panel

From audio output (or headphone out, etc.)

Yellow

UX-L5V[U]6th.indb   6

UX-L5V[U]6th.indb   6

09.4.2   11:08:29 AM

09.4.2   11:08:29 AM