JVC XU-301BK User Manual

English

Digital Connections

Before proceeding, check whether the optical digital cable can be
connected.

Connect the stereo amplifier and source component to the DIGITAL

(OPTICAL) connectors on the unit using the optical digital cable.
One connecting cable is used to transmit the stereo signals (L/R)
as the digital signals.

• How to use the OPTICAL connectors for

the connections

1 Remove the protective cap.

• When the connector is not going to be used, fit this

protective cap back in position.

2 Check that the end of the optical

digital cable is not dirty, and insert
it securely.

CD player, etc.

To OPTICAL connector (OUT)

Optional optical digital cable

Input signal

Note
• When the synchro record-

ing function is to be used,
connect the CD player etc.
and unit’s ground side
using the pin cord.

XU-301BK MD-CD combination deck

To OPTICAL OUT
connector

Output signal

Optional optical
digital cable

To OPTICAL INPUT connector

Stereo amplifier with OPTICAL
connector

Before purchasing an optical digital cable (optional), make sure that the cable in question can be
connected to the amplifier, etc.
Do not bend the optical digital cable.
Red light emitted from the OPTICAL OUT connector
When the power is turned on, the inside of the connector lights up red. This light is for sending the
digital signals. Although this light will not harm your eyes, keep the protective cap in place if the
connector is not going to be used.

DIGITAL IN

OPTICAL

DIGITAL OUT

OPTICAL

LINE

MODE

VICTOR COMPANY OF JAPAN , LIMITED MADE IN JAPAN

IN REC

( )

OUT PLAY

( )

LEFT

RIGHT

( )

2 SLAVE UNIT

( )

1 MASTER UNIT

TEXT COMPU LINK

COMPU LINK-3

SYNCHRO

04/p04-11(E)

4/3/98, 4:45 PM