JVC UX-G210 User Manual
6
English
Daily Operations
—Playback
1
Turn on the power.
The STANDBY lamp on the main unit turns off.
2
Select the source.
Playback automatically starts if the selected source is
ready to start.
• If you select AUDIO IN, start playback on the
ready to start.
• If you select AUDIO IN, start playback on the
external device.
3
Adjust the volume.
4
Operate the target source as
explained later.
explained later.
To turn off (standby) the System
How to select numbers
AUDIO IN
USB
MEMORY
CD
DISPLAY/
PROGRAM
PROGRAM
Number
buttons
TUNING/
GROUP
K,5
PRESET
1,y,
4,x
STOP 7
The STANDBY lamp on the main unit
lights up.
• A small amount of power is always
lights up.
• A small amount of power is always
consumed even while on standby.
For private listening
Connect a pair of headphones to the PHONES jack on
the rear of the main unit. The sound will no longer come
out of the speakers.
Connect a pair of headphones to the PHONES jack on
the rear of the main unit. The sound will no longer come
out of the speakers.
Be sure to turn down the volume
before connecting or putting the headphones.
• Disconnecting the headphones will activate the
speakers again.
DO NOT turn off (standby) the System with
the volume set to an extremely high level;
otherwise, the sudden blast of sound may
damage your hearing and/or speakers when
you turn on the System or start playback
again.
the volume set to an extremely high level;
otherwise, the sudden blast of sound may
damage your hearing and/or speakers when
you turn on the System or start playback
again.
Examples:
• To select number 5, press 5.
• To select number 20, press 10
• To select number 5, press 5.
• To select number 20, press 10
→ 2 → 0 (when “-- --”
appears), or press 10
appears), or press 10
→ 0 →
2
→ 0 (when “-- -- --” appears).
• To select number 125,
press 10
→ 1 → 2 → 5.
PHONES
1
4
7
0
2
5
8
3
6
9
10
=
>
=
>
=
>
UX-G210[C].BOOK Page 6 Monday, December 7, 2009 3:00 PM