JVC UX-G210 User Manual

Thank you for purchasing a JVC product.
Please read all instructions carefully before operation, to 
ensure your complete understanding and to obtain the best 
possible performance from the unit.

• Install in a place which is level, dry and neither too hot 

nor too cold—between 5°C and 35°C.

• Install the System in a location with adequate ventilation 

to prevent internal heat buildup inside the System.

• Leave sufficient distance between the System and the 

TV.

• Keep the speakers away from the TV to avoid 

interference with TV.

• When unplugging the System from the wall outlet, 

always pull on the plug, not the AC power cord.

Moisture may condense on the lenses inside the System in 
the following cases:
• After starting to heat the room.
• In a damp room.
• If the System is brought directly from a cold to a warm 

place.

Should this occur, the System may malfunction. In this 
case, leave the System turned on for a few hours until the 
moisture evaporates, unplug the AC power cord, then plug 
it in again.

• Should any metallic object or liquid fall into the System, 

unplug the AC power cord and consult your dealer before 
operating any further.

• If you are not going to operate the System for an 

extended period of time, unplug the AC power cord from 
the wall outlet.

If anything goes wrong, unplug the AC power cord and 
consult your dealer.

To make this manual as simple and easy-to-understand as 
possible, we have adapted the following methods:
• Button and control operations are explained as listed in the 

table below. In this manual, the operations using the remote 
control is mainly explained; however, you can use the 
buttons and controls on the main unit if they have the same 
(or similar) name and marks.

•

Some related tips and notes are explained later in the 
sections “Learning More about This System” and 
“Troubleshooting” but not in the same section 
explaining the operations. If you want to know more about 
the functions, or if you have a doubt about the functions, go 
to these sections and you will find the answers.

DO NOT install the System in a location 
near heat sources, or in a place subject to 
direct sunlight, excessive dust or vibration.

DO NOT handle the AC power cord with 
wet hands.

For safety, observe the following 
carefully:
• Make sure there is good ventilation 

around the main unit. Poor ventilation 
could overheat and damage the System.

• DO NOT block the ventilation openings 

or holes. If they are blocked by a 
newspaper or cloth, etc., the heat may 
not be able to get out.

DO NOT disassemble the System since 
there are no user serviceable parts inside.

Indicates that you press the button 

briefly.

Indicates that you press the button 

and repeatedly until the option you want 
is selected.

Indicates that you press one of the buttons.

Indicates that you 

press and hold the 

button for specified seconds.
• The number inside the arrow indicates the 

period of press (in this example, 2 
seconds).

• If no number is inside the arrow, press 

and hold until the entire procedure is 
complete or until you get the result you 
want.

• Indicates that you turn the control in the 

specified direction(s).

Indicates that this operation is only possible 
using the remote control.

Indicates that this operation is only possible 
using the buttons and controls on the main 
unit.

2

 sec.

UX-G210[C].BOOK  Page 2  Monday, December 7, 2009  3:00 PM