JVC LVT1348-003A User Manual

Page of 52
 
19
 
Setting the Clock
 
Without setting the built-in clock, you cannot use the Daily 
Timer (see page 33) and Sleep Timer (see the right column).
• To exit from the clock setting, press CLOCK/TIMER as 
required.
• To go back to the previous step, press CANCEL.
 
1
 
Activate the clock setting mode.
 
• If you have already adjusted the clock before, press the 
button repeatedly until the clock setting mode is 
selected (see page 33).
 
2
 
Adjust the hour.
 
3
 
Adjust the minute.
 
Now the built-in clock starts working.
 
To check the current clock time during play
 
• While playing a DVD/MP3/DivX, you cannot check the 
current clock time (see page 9).
 
Turning Off the Power 
 
Automatically 
 
To turn off the System after playback is over—
Auto Standby
 
When Auto Standby is in use, the A.STANDBY indicator 
lights on the display. When the disc play stops, the 
A.STANDBY indicator starts flashing. If no operation is 
done for about 3 minutes while the indicator is flashing, the 
System turns off (in standby) automatically.
• Auto Standby does not work while you are listening to 
radio (FM/AM) or the external component (AUX/USB).
 
To turn off the System after a certain period of 
time—Sleep Timer
 
1
 
Specify the time (in minutes).
 
• SLEEP indicator also lights up on the display.
 
2
 
Wait until the set time goes off.
To check the time remaining until the shut-off time
 
• If you press the button repeatedly, you can change the 
shut-off time.
Remote
ONLY
Clock
Source information
(at the same time)
Remote
ONLY
A.STANDBY
Canceled
(at the same time)
(at the same time)
(at the same time)
UX-GD7[B]_EN.book Page 19 Wednesday, April 20, 2005 4:59 PM