JVC CA-UXQD9S Instruction Manual
14
Pre
p
aratio
n
CAUTION
• Before connecting other equipment, turn off both
the main unit and the equipment.
CAUTION
• For details of signals to be output, refer to page 39.
• If connecting the main unit to equipment that has
• If connecting the main unit to equipment that has
the function of a Dolby Digital decoder, the set-
ting in "D. RANGE COMPRESSION" of "AUDIO"
(
ting in "D. RANGE COMPRESSION" of "AUDIO"
(
page 39) will be invalid regarding sound
from the digital audio output of the main unit.
CAUTION
• Connect the main unit directly with a TV (or a
monitor) without routing through a VCR. Otherwise
it may cause picture distortion while playing back.
(Such picture distortion is caused by a copy
protection system, and thus it is not a malfunction.)
it may cause picture distortion while playing back.
(Such picture distortion is caused by a copy
protection system, and thus it is not a malfunction.)
Also, if the main unit is connected to a TV with a
built-in VCR, there may be picture distortion during
playback.
built-in VCR, there may be picture distortion during
playback.
NOTE
• Please check that the setting for VIDEO OUT
SELECT (PAL/NTSC) on the rear panel of the main
unit and the color system on your TV set are the
same. (
unit and the color system on your TV set are the
same. (
page 6)
You need to set "MONITOR TYPE" in the
"PICTURE" menu correctly according to the aspect
ratio of your TV. (
"PICTURE" menu correctly according to the aspect
ratio of your TV. (
page 38)
Connecting Other Equipment
Read this section when connecting other audio
equipment to this product.
equipment to this product.
Other audio
equipment
Audio cord (not supplied)
Connecting with digital equipment
AV amplifier with a built-in
decoder (not supplied)
To an optical digital input
terminal
Optical digital cable
(not supplied)
Connecting with a TV
TV
Supplied video cord
Main unit
VIDEO IN
VIDEO
Main unit
Connecting directly
TV
(or monitor)
VCR
UX-QD9[A].book 14 ページ ２００４年９月６日 月曜日 午後３時２１分