JVC FS-H10 User Manual
15
English
For Tape operations, use buttons inside the front cover on the
unit.
unit.
Playing Back a Tape
You can play back type I tapes only.
On the unit ONLY:
1
Open the front cover.
2
Press
&/) (stop/cassette holder open).
The cassette holder opens.
3
Put a cassette in with the exposed part of the
tape down.
tape down.
Playing Back Tapes
TAPE
4
Close the cassette holder gently.
5
Press TAPE.
The unit automatically turns on and the source
changes to the tape deck.
• You can select to the tape by pressing TAPE
changes to the tape deck.
• You can select to the tape by pressing TAPE
on the remote control.
6
Press
# (play).
The tape starts playing.
• When the end of the tape is reached,
• When the end of the tape is reached,
playing stops.
To stop playing, press
&/).
To stop playing for a moment, press
* (pause).
To resume playing, press
* again.
To fast forward or rewind the tape, press
⁄ or !.
• The tape stops at the end of the fast
⁄ or !.
• The tape stops at the end of the fast
forwarding or rewinding. To release the
locked button, press
locked button, press
&/).
To remove the cassette, press
&/) while
playback is stopped.
• DO NOT turn off the unit while playing back or
recording a tape.The cassette deck or tapes may
be damaged.
be damaged.
• The use of C-120 or longer tape is not
recommended, since characteristic deterioration
may occur and this tape easily jams in the pinch
rollers and the capstans.
may occur and this tape easily jams in the pinch
rollers and the capstans.
• This unit is not compatible with type II and type
IV tapes.
FS-H10[C]tape.p65
03.6.5, 2:39 PM
15