JVC CA-DXT7 User Manual

 

Set this item correctly when using the OPTICAL DIGITAL OUTPUT terminal on the rear.

 

When connecting to audio equipment which can decode only linear PCM signals.

 

 When connecting to a Dolby Digital decoder or an amplifier with a built-

in Dolby Digital decoder.

 

When connecting to a DTS decoder or an amplifier with a built-in DTS decoder.

 

Set this item to listen to DVD Video recorded in Dolby Digital format at low or middle volume.

 

You can enjoy powerful playback sound.

 

 Select this if the sound level of DVD Video is lower than the one of TV program to make the 

sound at a lower volume clear.

 

Select this item, then press ENTER to show the LEVEL submenu for adjusting the speaker output 
level.

 

Select the speaker, then adjust the output level (–6 dB to +6 dB in 1 dB steps).

 

 Turns on/off the test tone.

• Select “ALL CH. ST,” “MUSIC,” or “MOVIE” (see page 16) to adjust the output level for all 

speakers with the test tone.

 

Select this item, then press ENTER to show the DELAY submenu for adjusting the speaker delay time.

 

Select the speaker, then adjust the delay time (0 ms to 15 ms in 1 ms steps).

• Set one speaker to “0 ms,” then set other speakers so that the sound from all speakers can reach you 

at the same time.

 

You can select Resume.

 

The System resumes playback from the position where playback has been stopped if the disc is 

still in the disc tray.

 

 Resume is deactivated.

 

Activate or deactivate the on-screen guide.

 

Activate the on-screen guide.

 

 Deactivate the on-screen guide.

DX-T7_T9[USUN]-f.book Page 40 Wednesday, February 16, 2005 1:12 PM