Insignia NS-A2110 User Manual

Insignia NS-A2110 Executive Shelf System

www.insignia-products.com

To repeat an entire program:
1 Press REPEAT twice while the program is playing.

2 To cancel repeat, press REPEAT again.

Do not try to repair the shelf system yourself. Doing so will 
invalidate your warranty.

No sound or 
power

Volume too low.

Turn up the volume.

AC power cord not securely 
connected.

Connect the AC power cord.

The CD does 
not play

The CD was incorrectly 
inserted.

Reinsert the CD, label side up.

The CD is defective.

Try another CD.

The CD compartment is not 
closed.

Close the CD door.

There is condensation in the 
CD compartment.

Remove the CD and leave the 
cover open for about an hour in a 
dry environment.

No disc 
indicated on the 
display

No CD inserted.

Insert a CD, CD-R, or CD-RW disc.

The CD is badly scratched or 
dirty.

Clean the CD if it’s dirty. Replace 
the CD if it’s defective.

There is condensation in the 
CD compartment.

Remove the CD and leave the 
cover open for about an hour in a 
dry environment.

You are using a CD-R or 
CD-RW that is blank or the 
disc has not been finalized.

Use a finalized CD-R or CD-RW.

No sound in the 
headphones.

The headphone jack is not 
correctly inserted.

Reinsert the headphone plug into 
the jack.

The volume control is turned 
down.

Increase the volume.

The CD is defective.

Try another CD.

The CD skips 
during play.

The CD or lens is dirty.

Clean or replace the CD, or clean 
the lens.

Strong shaking or vibrations

Place the shelf system on a flat and 
stable surface without vibration.

The CD player is programmed 
to skip a track.

Quit the Program mode.