Insignia NS-A2111 User Manual
28
Welcome
www.insignia-products.com
Specifications
The picture distorts or is out
of sync
of sync
• When playing discs that are severely scratched or
have interior defects, or when the system is
affected by strong outer electromagnetic fields, this
problem occurs and normal operation of this
system is affected.
affected by strong outer electromagnetic fields, this
problem occurs and normal operation of this
system is affected.
• Turn off the power for a while and turn it on again.
• Use a non-defective disc, and the system resumes
• Use a non-defective disc, and the system resumes
working normally.
• Unusually defective discs may shorten the service
life of this system.
No sound
Cancel mute mode or turn up the volume.
Disc type
DVD, CD, CD-R, and MP3
Video format
MPEG 2 for DVD, MPEG 1 for VCD
Audio format
MPEG 1, MPEG 2, PCM: STEREO
Signal output
Video system: NTSC, PAL, AUTO
Video output: 1.0 V p-p
Simulated audio output: 2 CH 1-2V
RMS: 10W×2 + 25W×1
Video output: 1.0 V p-p
Simulated audio output: 2 CH 1-2V
RMS: 10W×2 + 25W×1
Output joint
Component output, S-Video output, Video output, Stereo,
optical fiber, and coaxial digital audio output
optical fiber, and coaxial digital audio output
Audio joint
Audio 1 and Audio 2
Power supply
AC 110 V ±10% 60 Hz
Maximum power
120 W
Frequency power
+/- 3 dB (20 Hz-20 KHz)
Operating condition
Temperature: 41-95°F (5-35°C)
Operating status: Level
Operating status: Level
Audio signal-to-noise
≥
80 dB weight A
Note
These specifications are for reference only, and are subject
to change without prior notice.
to change without prior notice.
Problem
Cause and solution
NS-A2111.fm Page 28 Friday, January 26, 2007 6:59 AM