Sherwood RD-6500 User Manual
15
ENJOYING SURROUND SOUND
Depending on the input digital signal
format, select the desired decoding mode.
format, select the desired decoding mode.
1
• Surround sound effect will not work properly if the signal passes through a graphic equalizer.
Please refer to your equalizer operating instructions for guidance on switching off (or defeating) the equalizer.
POWER
DISPLAY
SLEEP
VIDEO1
1
2
3
VIDEO2
4
5
6
VIDEO3
7
8
9
CD
T.TONE
0
P.SCAN
TUNER
DSP MODE
D.TIME
ADJUST
AUX
MUTE
T.MON
CH. LEVEL
CH. SEL
MASTER VOLUME
REMOTE CONTROL UNIT RM-105
AUTO
AUTO
AUTO
Notes:
• Only when the digital input is selected as signal input for the input sources except TUNER, AUX and TAPE
MONITOR, the decoding mode can be selected.
Select the desired surround mode.
2
or
POWER
DISPLAY
SLEEP
VIDEO1
1
2
3
VIDEO2
4
5
6
VIDEO3
7
8
9
CD
T.TONE
0
P.SCAN
TUNER
DSP MODE
D.TIME
ADJUST
AUX
MUTE
T.MON
CH. LEVEL
CH. SEL
MASTER VOLUME
REMOTE CONTROL UNIT RM-105
DSP MODE
AUTO
DSP MODE
• Each time the DSP MODE button is pressed, the surround mode changes depending on the input signal format and
the selected decoding mode as follows:
When Dolby Digital signals are input in the IN-AUTO mode, one of the following modes can be selected
depending on the number of the recorded channels.
depending on the number of the recorded channels.
• Dolby Digital 5.1-channel sources: DOLBY DIGITAL
• Dolby Digital 2-channel sources: DOLBY PRO LOGIC II MOVIE, DOLBY PRO LOGIC, DOLBY PRO LOGIC II
• Dolby Digital 2-channel sources: DOLBY PRO LOGIC II MOVIE, DOLBY PRO LOGIC, DOLBY PRO LOGIC II
MUSIC, DOLBY PRO LOGIC II MATRIX and DOLBY PRO LOGIC II CUSTOM
When PCM(2 channel stereo) signals are input in the IN-AUTO or IN-PCM mode, one of the following modes can
be selected :
be selected :
DOLBY PRO LOGIC II MOVIE, DOLBY PRO LOGIC, DOLBY PRO LOGIC II MUSIC,
DOLBY PRO LOGIC II MATRIX, DOLBY PRO LOGIC II CUSTOM, MATRIX, CHURCH, THEATER,HALL and
STADIUM.
DOLBY PRO LOGIC II MATRIX, DOLBY PRO LOGIC II CUSTOM, MATRIX, CHURCH, THEATER,HALL and
STADIUM.
• When the analog input is selected as signal input and analog stereo signals are input, you can select the desired of
these above surround modes, too.
Notes:
• When the selected decoding mode is not matched to the input signal format, no sound is heard. Therefore, be sure
to select the required decoding mode and the available surround mode according to the input signal format.
• When the 6 CH DIRECT is selected as an input source, the decoding and surround modes cannot be selected.
• Each time the AUTO button is pressed, the decoding
mode changes as follows:
IN-AUTO : The input digital signal format(Dolby
Digital or PCM(2 channel stereo), etc.)
used by the selected digital input source
is detected automatically to perform the
necessary decoding process for optimum
surround modes.
is detected automatically to perform the
necessary decoding process for optimum
surround modes.
IN-PCM : The PCM signal processing is performed
only when PCM signals are input.
ENGLISH