Russound ST2-XM User Manual

21

To activate the ST2-KP, press 

. Press 

to

power down the keypad display. The keypad remains
powered until the ST2-XM Tuner is turned off. 

To select a different tuner, press and hold 

. (If the

keypad has been hardware jumper-selected to Tuner
1 or Tuner 2, it will not switch between the two
tuners.) The backlight color of the display will be
green for Tuner 1 (XM) and amber for Tuner 2
(AM/FM). Each time a tuner is selected the display
will refresh with the current station or preset for that
tuner, and

all subsequent button presses and memo-

ry preset entries will be associated with that selected
tuner.

Push 

to switch between AM or FM band.

Push 

to select an XM operating mode. 

Press and release  

until EXIT is displayed to exit

the XM operating mode menu.

Use 

and 

for manual tuning. To move quickly

through the channels, press and hold either 

or

for more than 1.5 seconds. European frequen-

cies show in .05 MHz increments.

To select a bank, select the desired tuner, then press

and hold 

or 

to select the desired bank. The

bank name will show on the display. 

To recall a memory preset, press and release 

or

to scroll through the presets for the selected

bank. (Memory presets must be stored for ST2-KP
recall)

The 5-character backlit display shows frequency and
band, plus XM channel and mode information.
Messages scroll twice, then display the first 5 char-
acters.