Netgear 2409 User Manual
Installation Guide for the 9 dBi Omni-directional Antenna ANT2409
2-2
Installing the 9 dBi Omni-directional Antenna
First, Assemble and Mount the Antenna
Figure 2-1: Antenna Assembly and Mounting
Step
Procedure
Step 1
Feed the antenna cable through the antenna
mounting assembly.
mounting assembly.
Note: Use the correct cable.
• Outdoors: use the provided 2m antenna
• Outdoors: use the provided 2m antenna
cable.
• Indoors: use the provided N/SMA adapter
with a Netgear
cable model
ACC-10314-01, 02, 03, 04 or 05 (sold
separately). For indoors, d
separately). For indoors, d
o not use the
provided 2m cable.
Step 2
Securely attach the antenna cable by screwing
it onto the antenna.
it onto the antenna.
Step 3
Insert the antenna into the mounting assembly.
Step 4
Position the key slot on the antenna so that it
is aligned with the mounting screw hole
illustrated in step 5.
is aligned with the mounting screw hole
illustrated in step 5.
Step 5
Tighten the mounting screw so that it fits in the
key slot on the antenna.
key slot on the antenna.
Step 6
Attach the assembled antenna to the mounting
surface with the appropriate hardware (U-bolts
for pole mount, L-bracket or no bracket for flat
mount).
surface with the appropriate hardware (U-bolts
for pole mount, L-bracket or no bracket for flat
mount).
Note: The antenna can be mounted vertically
right-side-up or up-side-down.
right-side-up or up-side-down.
#ABLE
3TEP
3TEP
3TEP
3TEP
3TEP
3TEP