Motorola CT-39A User Manual
36
FT-8800R Operating Manual
M
EMORY
O
PERATION
Memory Bank Operation
Memory Bank Assignment
1. Recall the memory channel (except L1/U1 ~ L10/U10) to be assigned to a Memory Bank.
2. Press and hold in the [V/M] key for 1/2 second, then rotate the “Main” band DIAL knob
1. Recall the memory channel (except L1/U1 ~ L10/U10) to be assigned to a Memory Bank.
2. Press and hold in the [V/M] key for 1/2 second, then rotate the “Main” band DIAL knob
to select the Memory Bank (“BANK1” ~ “BANK10” ) you want as the Memory Bank
for this channel.
for this channel.
3. Press and hold in the [SET] key for 1/2 second to copy the memory channel data into the
Memory Bank.
The PMS memory channel (L1/U1 through L10/U10) does not assign to the memory
bank.
bank.
Memory Bank Recall
1. Set the radio to the Memory mode by pressing the [V/M] key, if necessary.
2. Press and hold in the [V/M] key for 1/2 second, then rotate the “Main” band DIAL knob
1. Set the radio to the Memory mode by pressing the [V/M] key, if necessary.
2. Press and hold in the [V/M] key for 1/2 second, then rotate the “Main” band DIAL knob
to select the Memory Bank (“BANK1” ~ “BANK10” ).
3. Press the [SET] key momentarily to lock in the selected Memory Bank.
4. In the Memory Bank mode of operation, you can only select memory channels in the
4. In the Memory Bank mode of operation, you can only select memory channels in the
current memory bank.
5. To change the Memory Bank to another Bank, press and hold in the [V/M] key for 1/2
seconds, then rotate the “Main” band DIAL knob.
6. To exit from Memory Bank operation, press and hold in the [V/M] key for 1/2 second, then
rotate the “Main” band DIAL knob to select “ALL.MEM,” then press the [SET] key mo-
mentarily.
mentarily.
Deleting a Memory Channel from a Memory Bank
1. In the Memory Bank mode, recall the memory channel to be deleted from the Memory Bank.
2. Press and hold in the [V/M] key for 1/2 second, then press and hold in the [SET] key for
1. In the Memory Bank mode, recall the memory channel to be deleted from the Memory Bank.
2. Press and hold in the [V/M] key for 1/2 second, then press and hold in the [SET] key for
1/2 second to delete the Memory Channel from the Memory Bank.
Memory Only Mode
Once memory channel programming has been completed, you may place the radio in a
“Memory Only” mode, whereby VFO operation is impossible. This may be particularly
useful during public-service events where a number of operators may be using the radio for
first time, and ultimate simplicity of channel selection is desired.
“Memory Only” mode, whereby VFO operation is impossible. This may be particularly
useful during public-service events where a number of operators may be using the radio for
first time, and ultimate simplicity of channel selection is desired.
To place the radio into the Memory Only mode:
1. Turn the radio off.
2. Press and hold in the “left” [V/M] key while turning the radio on.
3. Rotate the “right” DIAL knob to select the (F-6 M-ONLY MODE), then press the [SET]
1. Turn the radio off.
2. Press and hold in the “left” [V/M] key while turning the radio on.
3. Rotate the “right” DIAL knob to select the (F-6 M-ONLY MODE), then press the [SET]
key momentarily.
To return to normal operation, repeat the above steps.
R
EGULAR
M
EMORY
C
HANNEL
O
PERATION