Novatel GLONASS Leaflet

Page of 2
WARRANTY POLICY 
 
NovAtel Inc. warrants that its Global Positioning System (GPS) products are free from defects in materials and 
workmanship, subject to the conditions set forth below, for the following periods of time: 
 
NovAtel L1 GPS/L1 GLONASS Antenna 
One (1) Year 
Cables and Accessories   
 
Ninety (90) Days 
 
Date of sale shall mean the date of the invoice to the original customer for the product.  NovAtel’s responsibility 
respecting this warranty is limited solely to product repair at an authorized NovAtel location only.  Determination of 
repair will be made by NovAtel personnel or by technical personnel expressly authorized by NovAtel for this purpose. 
 
THE FOREGOING WARRANTIES DO NOT EXTEND TO (I) NONCONFORMITIES, DEFECTS OR ERRORS IN 
THE PRODUCTS DUE TO ACCIDENT, ABUSE, MISUSE OR NEGLIGENT USE OF THE PRODUCTS OR USE IN 
OTHER THAN A NORMAL AND CUSTOMARY MANNER, ENVIRONMENTAL CONDITIONS NOT 
CONFORMING TO NOVATEL’S SPECIFICATIONS, OR FAILURE TO FOLLOW PRESCRIBED INSTALLATION, 
OPERATING AND MAINTENANCE PROCEDURES, (II) DEFECTS, ERRORS OR NONCONFORMITIES IN THE 
PRODUCTS DUE TO MODIFICATIONS, ALTERATIONS, ADDITIONS OR CHANGES NOT MADE IN 
ACCORDANCE WITH NOVATEL’S SPECIFICATIONS OR AUTHORIZED BY NOVATEL, (III) NORMAL WEAR 
AND TEAR, (IV) DAMAGE CAUSED BY FORCE OF NATURE OR ACT OF ANY THIRD PERSON, (V) 
SHIPPING DAMAGE; OR (VI) SERVICE OR REPAIR OF PRODUCT WITHOUT PRIOR WRITTEN CONSENT 
FROM NOVATEL. 
 
IN ADDITION, THE FOREGOING WARRANTIES SHALL NOT APPLY TO PRODUCTS DESIGNATED BY 
NOVATEL AS BETA SITE TEST SAMPLES, EXPERIMENTAL, DEVELOPMENTAL, PREPRODUCTION, 
SAMPLE, INCOMPLETE OR OUT OF SPECIFICATION PRODUCTS OR TO RETURNED PRODUCTS IF THE 
ORIGINAL IDENTIFICATION MARKS HAVE BEEN REMOVED OR ALTERED. 
 
THE WARRANTIES AND REMEDIES ARE EXCLUSIVE AND ALL OTHER WARRANTIES, EXPRESS OR 
IMPLIED, WRITTEN OR ORAL, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY OR 
FITNESS FOR ANY PARTICULAR PURPOSE ARE EXCLUDED. 
 
NOVATEL SHALL NOT BE LIABLE FOR ANY LOSS, DAMAGE OR EXPENSE ARISING DIRECTLY OR 
INDIRECTLY OUT OF THE PURCHASE, INSTALLATION, OPERATION, USE OR LICENSING OR PRODUCTS 
OR SERVICES.  IN NO EVENT SHALL NOVATEL BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR 
CONSEQUENTIAL DAMAGES OF ANY KIND OR NATURE DUE TO ANY CAUSE. 
 
There are no user-serviceable parts in the NovAtel L1 GPS/ L1 GLONASS antenna and no maintenance is required.  
When the GPSCard status code indicates that the unit is faulty, replace with another unit and return the faulty unit to 
NovAtel Inc. 
 
You must obtain a RETURN MATERIAL AUTHORIZATION (RMA) number by calling GPS Customer Service at 
1-800-280-2242 (North America only) or 403-295-4900 before shipping any product to NovAtel or Dealer. 
 
Once you have obtained an RMA number, you will be advised of proper shipping procedures to return any defective 
product.  When returning any product to NovAtel, please return the defective product in the original packaging to avoid 
ESD and shipping damage. 
 
© 1999 NovAtel Inc.  All rights reserved 
Unpublished rights reserved under International copyright laws. 
 
November 18, 1999 
OM-20000037  Rev. 1 
 
NovAtel Inc. 
1120 – 68
th
 Avenue N.E. 
Calgary, Alberta, Canada  T2E 8S5 
http://www.novatel.ca 
 
 
 
NovAtel L1 GPS/ L1 GLONASS Antenna 
Model 504 
 
 
 
- User Information - 
 
 
 
 
DESCRIPTION 
 
The Model 504 GPS/GLONASS antenna is intended for surveying and 
other kinematic positioning applications.  The sealed radome allows 
the antenna to be used in severe weather and hostile environments, and 
the unit’s compact size and light weight ensure its portability. 
The Model 504 GPS/GLONASS antenna is an active antenna designed 
to operate at the GPS L1 frequency 1575.42 and the GLONASS L1 
frequency range 1602.0 - 1615.5.  The microstrip receiving antenna 
element is coupled to filters and a low-noise amplifier (LNA).  The 
unit is optimized to receive right-hand-circularly-polarized signals, and 
its radiation pattern is shaped to reduce signals arriving at low 
elevation angles; these features decrease the errors associated with 
electromagnetic interference and multipath. 
Both the input DC power and the output RF signal flow over a single 
coaxial cable that is connected to the unit’s TNC female connector. 
The antenna baseplate features a permanent adaptor that accepts a 5/8
x 11 threaded bolt; this allows the antenna to be used on a tripod. 
Ï Caution:  overtightening a bolt into the base may damage the base.