Panasonic SC-AK240 User Manual
12
RQT8043
RQTV0061
LANG - 5
LANG - 4
FRANÇAIS
DANSK
ENGLISH
FM allocation setting
FM allocation setting
By main unit only
This system can also receive FM broadcasts allocated in
0.1 MHz steps.
0.1 MHz steps.
To change the step to 0.1 MHz
1
Press and hold [TUNER, BAND].
After a few seconds the display changes to a fl ashing
display of the current minimum frequency.
After a few seconds the display changes to a fl ashing
display of the current minimum frequency.
2
Continue to hold down [TUNER, BAND].
• When the minimum frequency changes, release the
• When the minimum frequency changes, release the
button. To return to the original step, repeat the above
steps.
steps.
• After changing the setting, previously preset frequency
will be cleared.
Memory preset
Memory preset
Up to 15 stations each can be set in the FM and AM bands.
Preparation
Press [TUNER, BAND] to select “FM” or “AM”.
Press [TUNER, BAND] to select “FM” or “AM”.
Automatic presetting
Automatic presetting
1
Tune to the frequency where pre-setting is to begin.
2
Press and hold [PROGRAM] to start presetting.
The tuner presets all the stations it can receive into the
channels in ascending order. When fi nished, the last station
memorized is tuned in.
channels in ascending order. When fi nished, the last station
memorized is tuned in.
Manual presetting
Manual presetting
1
Press [PLAY MODE] to select “MANUAL”.
2
Press [
4, REW / ] or [¢, / FF] to tune to the
required station.
3
Press [PROGRAM].
4
Press the numeric buttons to select a channel.
For channels 10 to 15 press [
For channels 10 to 15 press [
h10], then the two digits.
The station occupying a channel is erased if another
station is preset in that channel.
station is preset in that channel.
Selecting a preset station
Selecting a preset station
Press the numeric buttons to select the channel.
OR
1
Press [PLAY MODE] to select “PRESET”.
2
Press [
4, REW / ] or [¢, / FF] to select the
channel.
Numeric
buttons
buttons
Manual tuning
Manual tuning
1
Press [TUNER, BAND] to select “FM” or “AM”.
2
Press [PLAY MODE] to select “MANUAL”.
3
Press [
4, REW / ] or [¢, / FF] to select the
frequency of the required station.
• “
” is displayed when a stereo FM broadcast is being
received.
• “TUNED” is displayed when a radio station is tuned.
To tune automatically
Press and hold [
Press and hold [
4, REW / ] or [¢, / FF] until the
frequency starts changing rapidly. The unit begins auto
tuning, stopping when it fi nds a station.
• Auto tuning may be interrupted when there is excessive
tuning, stopping when it fi nds a station.
• Auto tuning may be interrupted when there is excessive
interference.
• To cancel auto tuning, press [
4, REW / ] or
[
¢, / FF] once again.
To improve FM sound quality
To improve FM sound quality
Press and hold [PLAY MODE] to display “MONO”.
To cancel
Press and hold [PLAY MODE] again until “MONO”
disappear.
• MONO is also canceled if the frequency is changed.
• Turn off “MONO” for normal listening.
Press and hold [PLAY MODE] again until “MONO”
disappear.
• MONO is also canceled if the frequency is changed.
• Turn off “MONO” for normal listening.
Radio
RQTV0061-4P_1EN.indd 12
RQTV0061-4P_1EN.indd 12
2/17/06 11:27:20 AM
2/17/06 11:27:20 AM