Panasonic SC-HC35 User Manual

Page of 28
9
RQ
T
X
12
60
ENGLISH
Opening/Closing the 
sliding door
Preparation
Press [Í] to turn the unit on.
For disc operations:
While the sliding door is closed, press [CD
<]  
to open the sliding door.
For iPod/iPhone operations:
While the sliding door is closed, press [iPod
<
to open the sliding door.
∫ Closing the sliding door
Press [CD <]  or [iPod <] again.
≥ Keep fingers away from the sliding door when it is closing to avoid possible 
minor injuries.
≥ Damage may occur if the sliding door is forced closed. 
≥ Be careful of CD hitting the sliding door while being removed.
≥ The sliding door will not close if the docking switch lever is not returned to the 
original position.
With this function the sliding door can be opened without 
pressing a button. The sliding door will open or close by moving 
the palm of your hand over the sensors on the top of the unit.
For disc operations:
Place the palm of your hand over sensor B and 
then move it over sensor 
A.
≥ To close the sliding door, place the palm of your hand over 
sensor A and then move it over sensor B.
For iPod/iPhone operations:
Place the palm of your hand over sensor A and 
then move it over sensor 
B.
≥ To close the sliding door, place the palm of your hand over 
sensor B and then move it over sensor A.
∫ To change the setting of the open/close sensor
The sensitivity of the sensor can be changed to increase or 
decrease the activating area of the open/close sensor. 
Press [OPEN/CLOSE SENSOR] repeatedly to 
select “MODE 1”, “MODE 2”, “MODE 3” or 
“OFF SENSOR”.
Select the mode that allows correct operation.
≥ Factory preset: “MODE 2”
≥ To turn the open/close sensor off, select “OFF SENSOR”.
∫ To change the sound effect settings of the 
open/close sensor
1 Press [SOUND] repeatedly to select “BUZZER”.
2 Press [
2] or [1] to select the following setting.
≥ A red light is lit from the position of the sensor. This is normal.
≥ The open/close sensor might be unintentionally activated if an object, hand, 
part of your arm, pets or children move over the top of the unit.
≥ If the open/close sensor does not react, move the palm of your hand closer to 
the top of the unit and change the speed that you move your hand.
≥ If the open/close sensor does not work, try changing the sensor’s setting. If it 
still does not work, open/close the sliding door using the buttons on the unit or 
the remote control.
≥ When the sensor setting is changed to “MODE 1”, move your hand closer 
(approx. 3 cm (1
1
/
8
")) over the unit.
≥ The disc operation side of the sliding door will not open during CD playback 
or pause.
Disc operations
1
Press [Í] to turn the unit on.
2
Open the sliding door. (left)
3
With the label of the disc facing 
towards you, tilt the disc into the 
disc tray under the sliding door.
4
Place the disc onto the spindle in 
the center and then push the disc 
down until it clicks into place.
≥ Make sure that the unit does not fall when 
inserting the disc.
5
Close the sliding door. (left)
∫ Removing a disc
1 Open the sliding door.
2 Hold the center and the top right of the disc and pull the top 
right of the disc to unlock it from the spindle.
3 Tilt the disc so as not to touch the sliding door or the lens and 
remove the disc.
Opening the sliding door
[HC55]
 Open/Close sensor
A
B
ンモュリヰ
ヷヰロヶヮユ
ヷヰロヶヮユ
LOW:
Set the sound effect level to low.
MID:
Set the sound effect level to medium.
HIGH:
Set the sound effect level to high.
OFF:
Turn the sound effect off.
Inserting a disc
SC-HC55_35-RQTX1260.book  9 ページ  2011年4月4日 月曜日 午後4時50分