Panasonic SC-AKX16 Leaflet

Page of 2
Operating Instructions
CD Stereo System
Model No.
 SC-AKX16
Thank you for purchasing this product. 
For optimum performance and safety, please read these instructions carefully.
Please keep this manual for future reference.
Panasonic Corporation
Web Site: http://panasonic.net
© Panasonic Corporation 2012
En
RQT9791-B
L1212HH0
E
Pursuant to the applicable EU legislation
Panasonic Marketing Europe GmbH
Panasonic Testing Centre
Winsbergring 15, 22525 Hamburg, Germany
Do the procedures with the remote control. You can 
also use the buttons on the main unit if they are the 
same.
Your system and the illustrations can look differently.
These operating instructions are applicable to the following 
system.
Back of product
Safety precautions
WARNING!
Unit
• To reduce the risk of fire, electric shock or product 
damage,
– Do not expose this unit to rain, moisture, dripping or 
splashing.
– Do not place objects filled with liquids, such as vases, 
on this unit.
– Use only the recommended accessories.
– Do not remove covers.
– Do not repair this unit by yourself. Refer servicing to 
qualified service personnel.
• Do not let metal objects fall inside this unit.
CAUTION!
Unit
• To reduce the risk of fire, electric shock or product 
damage,
– Do not install or place this unit in a bookcase, built-in 
cabinet or in another confined space. Ensure this unit 
is well ventilated.
– Do not obstruct this unit’s ventilation openings with 
newspapers, tablecloths, curtains, and similar items.
– Do not place sources of naked flames, such as lighted 
candles, on this unit.
• Set the unit up on an even surface away from direct 
sunlight, high temperatures, high humidity, and excessive 
vibration.
• This unit is intended for use in moderate climates.
• The mains plug is the disconnecting device. Install this 
unit so that the mains plug can be unplugged from the 
socket outlet immediately.
• This unit may receive radio interference caused by 
mobile telephones during use. If such interference 
occurs, please increase separation between this unit and 
the mobile telephone.
• This unit utilizes a laser. Use of controls or adjustments 
or performance of procedures other than those specified 
herein may result in hazardous radiation exposure.
Battery
• Danger of explosion if battery is incorrectly replaced. 
Replace only with the type recommended by the 
manufacturer.
• When disposing the batteries, please contact your local 
authorities or dealer and ask for the correct method of 
disposal.
• Do not heat or expose to flame.
• Do not leave the battery(ies) in a car exposed to direct 
sunlight for a long period of time with doors and windows 
closed.
• Do not break open or short-circuit the battery.
• Do not charge the alkaline or manganese battery.
• Do not use the battery if the cover has peeled off.
• Remove the battery if you do not use the remote control 
for a long period of time. Keep in a cool, dark area.
System
SC-AKX16
Main unit
SA-AKX16
Speakers
SB-AKX16
Caution for AC mains lead
 For the United Kingdom 
For your safety, please read the following text carefully. 
This appliance is supplied with a moulded three pin mains 
plug for your safety and convenience. 
A 5-ampere fuse is fitted in this plug.
Should the fuse need to be replaced please ensure that the 
replacement fuse has a rating of 5-ampere and that it is 
approved by ASTA or BSI to BS1362. 
Check for the ASTA mark   or the BSI mark   on the body 
of the fuse.
If the plug contains a removable fuse cover you must 
ensure that it is refitted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a 
replacement cover is obtained.
A replacement fuse cover can be purchased from your local 
dealer.
Before use
Remove the connector cover.
How to replace the fuse
The location of the fuse differ according to the type of AC 
mains plug (figures A and B). Confirm the AC mains plug 
fitted and follow the instructions below.
Illustrations may differ from actual AC mains plug.
1. Open the fuse cover with a screwdriver.
2. Replace the fuse and close or attach the fuse cover.
Sales and Support Information
 For the United Kingdom and Ireland 
Customer Communications Centre
• For customers within the U.K.: 0844 844 3899
• For customers within Ireland: 01289 8333
• Monday – Friday 9:00am – 5:00pm (Excluding public 
holidays).
• For further support on your product, please visit our 
website: www.panasonic.co.uk
Direct Sales at Panasonic U.K.
• Order accessory and consumable items for your 
product with ease and confidence by phoning our 
Customer Communications Centre Monday – Friday 
9:00am – 5:00pm (Excluding public holidays).
• Or go on line through our Internet Accessory ordering 
application at www.pas-europe.com.
• Most major credit and debit cards accepted.
• All enquiries transactions and distribution facilities are 
provided directly by Panasonic U.K.
• It couldn’t be simpler!
• Also available through our Internet is direct shopping for 
a wide range of finished products. Take a browse on our 
website for further details.
Supplied accessories
Check and identify the supplied accessories.
Use numbers indicated in parentheses when asking for 
replacement parts. (Product numbers correct as of 
December 2012. These may be subject to change.)
2 x AC mains lead
 For the United Kingdom 
(K2CT2YY00097)
 For others 
(K2CQ2YY00119)
1 x AM loop antenna
(N1DYYYY00011)
1 x FM indoor antenna
(RSAX0002)
1 x Remote control battery
1 x Remote control 
(N2QAYB000900)
 For the United Kingdom 
1 x Antenna plug adaptor
(K1YZ02000013)
Figure A
Figure B
Fuse cover
Figure A
Figure B
Fuse (5 ampere)
Fuse (5 ampere)
Placement of speakers
The left and right speakers are the same.
You cannot remove the net of the speakers.
Use only the supplied speakers.
You can cause damage to the system and decrease the 
sound quality if you use other speakers.
Note:
• Keep your speakers more than 10 mm from the main unit 
for ventilation.
• Put the speakers on a flat safe surface.
• These speakers do not have magnetic shielding. Do not 
put them near TVs, PCs or other equipment easily 
influenced by magnetism.
• When you play at high levels for a long period, it can 
cause damage to the speakers and decrease the life of 
the speakers.
• Decrease the volume in these conditions to prevent 
damage:
– When the sound is distorted.
– When you adjust the sound quality.
Preparing the remote control
Use alkaline or manganese battery.
Install the battery so that the poles (+ and –) align with those 
in the remote control.
Information for Users on Collection and Disposal of 
Old Equipment and Used Batteries
These symbols on the products, packaging, 
and/or accompanying documents mean that 
used electrical and electronic products and 
batteries should not be mixed with general 
household waste.
For proper treatment, recovery and recycling of 
old products and used batteries, please take 
them to applicable collection points, in 
accordance with your national legislation and 
the Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries 
correctly, you will help to save valuable 
resources and prevent any potential negative 
effects on human health and the environment 
which could otherwise arise from inappropriate 
waste handling.
For more information about collection and 
recycling of old products and batteries, please 
contact your local municipality, your waste 
disposal service or the point of sale where you 
purchased the items.
Penalties may be applicable for incorrect 
disposal of this waste, in accordance with 
national legislation.
For business users in the European Union
If you wish to discard electrical and electronic 
equipment, please contact your dealer or 
supplier for further information.
[Information on Disposal in other Countries 
outside the European Union]
These symbols are only valid in the European 
Union. If you wish to discard these items, 
please contact your local authorities or dealer 
and ask for the correct method of disposal.
Note for the battery symbol (bottom two 
symbol examples):
This symbol might be used in combination with 
a chemical symbol. In this case it complies with 
the requirement set by the Directive for the 
chemical involved.
CAUTION!
• Use the speakers only with the recommended 
system. If not, you can cause damage to the 
amplifier and speakers and can cause a fire. 
Consult an approved service personnel if damage 
occurs or if there is a sudden apparent change in 
performance.
• Do the procedures included in these instructions 
when you attach the speakers.
Making the connections
Connect the AC mains lead only after all the other 
connections have been made.
1
Connect the AM loop antenna.
Stand the antenna up on its base until it clicks.
2
Connect the FM indoor antenna.
Place the antenna where reception is best.
3
Connect the speakers.
Connect the speaker cables to the terminals of the 
same colour.
4
Connect the AC mains lead.
Do not use an AC mains lead from other equipment.
Conserving power
The system consumes approximately 0.4 W when it is 
in standby mode. Disconnect the power supply if you 
do not use the system.
Some settings will be lost after you disconnect the 
system. You have to set them again.
1
2
3
4
B
A
 For the United Kingdom 
Connect the FM outdoor antenna
If the radio reception is poor, use an optional outdoor 
antenna. This antenna should be installed by a 
competent technician.
Note:
• Do not use the outdoor antenna during a lightning 
storm.
• Disconnect the outdoor antenna when the unit is 
not in use.
Tape
FM outdoor antenna
(not supplied)
75 
ȍ coaxial cable
(not supplied)
Use the antenna plug 
adaptor (supplied).
Be careful not to cross 
(short-circuit) or reverse the 
polarity of the speaker wires 
as doing so may damage the 
speakers.
 For the United Kingdom 
READ THE CAUTION FOR AC MAINS LEAD 
BEFORE CONNECTION.
B
A
Black
Red
To household 
mains socket
Overview of controls
A
Standby/on switch [
`], [1]
Press to switch the unit from on to standby mode or vice 
versa. In standby mode, the unit is still consuming a 
small amount of power.
B
Numeric buttons [1 to 9, 0,  10]
To select a 2-digit number
Example: 16: [ 10]
=[1]=[6]
C
Delete a programmed track
D
Select audio source
E
Basic playback control
F
Select the sound effects
G
Auto preset the radio station
H
View content information
Decrease the brightness of the display panel
Press and hold the button to use this function.
To cancel, press and hold the button again.
I
Set the clock and timer
J
Set the program function
K
Adjust the volume of the system
L
Mute the sound of the system
Press the button again to cancel.
“MUTE” is also cancelled when you adjust the volume 
or when you switch off the system.
M
Set the play menu item
N
Set the radio menu item
O
Select the option
P
Automatically switch off the system
When you are in disc, USB or AUX source, the auto off 
function switches off the system if you do not use the 
system for 30 minutes.
To cancel, press the button again.
Q
Remote control sensor
Distance: Within approximately 7 m
Angle: Approximately 20° up and down, 30° left and 
right
R
Select bass, mid or treble effect
S
USB port (
)
T
Display panel
U
Open or close the disc tray
V
Disc tray
RADIO
EXT-IN
SOUND
PRESET EQ
D.BASS
DISPLAY
DIMMER
SLEEP
PLAY
AUTO OFF
A
B
C
D
E
G
F
H
J
I
K
L
N
M
O
P
MANUAL EQ
D.BASS
TUNE MODE
USB
CD
RADIO/
 EXT-IN
 –
     
VOLUME    
+
OPEN/
CLOSE    
PRESET EQ
A
F
E
Q
F
S
R
T
D
E
U
V
K