Panasonic SC-HC39 User Manual
12
RQT9882
Sound adjustment
The following sound effects can be added to the
audio output.
audio output.
1
Press [SOUND] repeatedly to select the effect.
2
Press [
3, 4] to select the setting and then
press [OK].
≥ You may experience a reduction in sound quality when
these effects are used with some sources. If this occurs,
turn the sound effects off.
turn the sound effects off.
≥ When “AUX” is selected as the source, you can select
“INPUT LEVEL” to adjust the sound input level of the
external device. (
external device. (
l p. 6)
Clock and Timer
This is a 12-hour clock.
1
Press [SETUP] repeatedly to select “CLOCK”.
2
Press [
3, 4] to set the time and then press
[OK].
≥ To display the clock, press [SETUP] repeatedly to select
“CLOCK” and then press [OK] once. The time is
displayed for 10 seconds. (During standby, press
[DISPLAY] once.)
displayed for 10 seconds. (During standby, press
[DISPLAY] once.)
≥ The clock is reset when there is a power failure or when
the AC power supply cord is removed.
≥ Reset the clock regularly to maintain accuracy.
You can set the timer so this unit turns on at a
certain time every day.
certain time every day.
Preparation
Set the clock.
Set the clock.
∫ Setting the timer
1
Press [SETUP] repeatedly to select “TIMER ADJ”.
2
Press [
3, 4] to set the starting time
(“ON TIME”) and then press [OK].
3
Press [
3, 4] to set the finishing time
(“OFF TIME”) and then press [OK].
4
Press [
3, 4] to select the music source* and
then press [OK].
∫ Turning the timer on
1
Prepare the selected music source and set the
desired volume.
desired volume.
2
Press [SETUP] repeatedly to select “TIMER SET”.
3
Press [
3, 4] to select “SET” and then press
[OK].
≥ “
F” is displayed.
≥ To turn the timer off, select “OFF”.
4
Press [
Í] to turn the unit to standby mode.
≥ To display the timer settings, press [SETUP] repeatedly
to select “TIMER ADJ” and then press [OK] once.
The music source and volume will also be displayed if
the timer is turned on.
The music source and volume will also be displayed if
the timer is turned on.
≥ During standby, if the timer is turned on, press
[DISPLAY] twice to display the settings.
≥ This unit can be used as normal after the timer is set,
however:
– Turn the unit to standby mode before the timer start time.
– Even if the audio source or the volume is changed, the
– Turn the unit to standby mode before the timer start time.
– Even if the audio source or the volume is changed, the
timer will still use the audio source and volume that
was set when the timer was turned on.
was set when the timer was turned on.
* “CD”, “FM” and “AUX” can be set as the music source.
The sleep timer can turn the unit off after a set time.
1
Press [SETUP] to select “SLEEP”.
2
Press [
3, 4] to set the time (in minutes) and
then press [OK].
“SLEEP 30”
,.
“SLEEP 60”
,.
“SLEEP 90”
,.
“SLEEP120”
^--------------------.
“OFF” (Cancel)
(---------------------J
≥ The remaining time is indicated on the unit’s display
except when other operations are performed.
≥ The play timer and sleep timer can be used together.
The sleep timer is always the main timer on the unit.
“PRESET EQ”
(Preset
Equalizer)
(Preset
Equalizer)
“HEAVY” (heavy), “SOFT”
(soft), “CLEAR” (clear),
“VOCAL” (vocal) or “FLAT”
(flat/off).
(soft), “CLEAR” (clear),
“VOCAL” (vocal) or “FLAT”
(flat/off).
≥ The factory default is “HEAVY”.
“BASS” (Bass) or
“TREBLE” (Treble)
“TREBLE” (Treble)
Adjust the level (
j4 to i4).
“D.BASS”
(Dynamic Bass)
(Dynamic Bass)
“ON D.BASS” or
“OFF D.BASS”.
“OFF D.BASS”.
≥ The factory default is
“ON D.BASS”.
“SURROUND”
(Surround)
(Surround)
“ON SURROUND” or
“OFF SURROUND”.
“OFF SURROUND”.
≥ The factory default is
“OFF SURROUND”.
Setting the clock
Play timer
Sleep timer
SC-HC39_PPC~RQT9882_mst.book 12 ページ ２０１４年１月３１日 金曜日 午後７時４５分