Panasonic SC-HC05 Leaflet

Owner’s Manual

Model No.

Panasonic Consumer Electronics Company, 
Division of Panasonic Corporation of North America
One Panasonic Way, Secaucus,
New Jersey 07094
http://www.panasonic.com

© Panasonic Corporation 2011
Printed in China

P

Sp

En

RQTX1316-2P

L0111HH2031

Thank you for purchasing this system.

For optimum performance and safety, read these 
instructions fully before you connect, operate or adjust 
this system.

Keep this manual for future reference.

Your system and the illustrations can look differently.

As an ENERGY STAR

®

 Partner, 

Panasonic has determined 
that this product meets the 
ENERGY STAR

®

 guidelines for 

energy efficiency.

Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety 
instructions listed below. Keep these operating instructions handy for future reference.

1)  Read these instructions.

2)  Keep these instructions.

3)  Heed all warnings.

4)  Follow all instructions.

5)  Do not use this apparatus near water.

6)  Clean only with dry cloth.

7)  Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8)  Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce 

heat.

9)  Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the 

other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your 
safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they 

exit from the apparatus.

11)  Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. 

When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as 

power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been 
exposed to rain or moisture, does not operate normally, or has been dropped.

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK 
OR PRODUCT DAMAGE,
• 

• 

• 

CAUTION!
Danger of explosion if battery is incorrectly replaced. Replace 
only with the same or equivalent type recommended by the 
manufacturer. Dispose of used batteries according to the 
manufacturer’s instructions.

WARNING
Risk of fire, explosion and burns. Do not disassemble, heat 
above 60°C (140°F) or incinerate.

WARNING
Keep the Button-Type battery out of reach of children to 
prevent swallowing.

This symbol is only valid in the European Union.
If you wish to discard this product, please 
contact your local authorities or dealer and ask 
for the correct method of disposal.

The Bluetooth

®

 word mark and logos are owned by the 

Bluetooth SIG, Inc. and any use of such marks by Panasonic 
Corporation is under license. Other trademarks and trade 
names are those of their respective owners.

This equipment has been tested and found to comply with the 
limits for a Class B digital device, pursuant to Part 15 of the 
FCC Rules.
These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This 
equipment generates, uses and can radiate radio frequency 
energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio 
communications.
However, there is no guarantee that interference will not occur 
in a particular installation. If this equipment does cause harmful 
interference to radio or television reception, which can be 
determined by turning the equipment off and on, the user is 
encouraged to try to correct the interference by one or more of 
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for 

help.

FCC caution: To maintain compliance with FCC regulations, 
shielded interface cables must be used with this equipment. 
Operation with non-approved equipment or unshielded cables 
may result in interference to radio and TV reception. Any 
changes or modifications not approved by the party responsible 
for compliance could void the user’s authority to operate this 
equipment.

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1)  This device may not cause harmful interference, and
(2)  this device must accept any interference received, 

including interference that may cause undesired operation.

Responsible Party:
Panasonic Corporation of North America
One Panasonic Way
Secaucus, NJ 07094

Support Contact:
Panasonic Consumer Electronics Company
Telephone No.: 1-800-211-PANA (7262)

To satisfy FCC RF exposure requirements for mobile 
transmitting devices, a separation of 20 cm or more should be 
maintained between the antenna of this device and persons 
during device operation. To ensure compliance, operations at 
closer than this distance are not recommended. The antenna 
used for this transmitter must not be co-located in conjunction 
with any other antenna or transmitter.

“Made for iPod” and “Made for iPhone” mean that an electronic 
accessory has been designed to connect specifically to 
iPod, or iPhone, respectively, and has been certified by the 
developer to meet Apple performance standards.

Apple is not responsible for the operation of this device or its 
compliance with safety and regulatory standards.

Please note that the use of this accessory with iPod, or iPhone 
may affect wireless performance.

iPhone, iPod, iPod classic, iPod nano, and iPod touch are 
trademarks of Apple Inc., registered in the U.S. and other 
countries.

CAUTION:  TO REDUCE THE RISK OF ELECTRIC 

SHOCK, DO NOT REMOVE SCREWS.

 

NO USER-SERVICEABLE PARTS 
INSIDE.

 

REFER SERVICING TO QUALIFIED 
SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, 
within an equilateral triangle, is intended to 
alert the user to the presence of uninsulated 
“dangerous voltage” within the product’s 
enclosure that may be of sufficient magnitude 
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral 
triangle is intended to alert the user to 
the presence of important operating and 
maintenance (servicing) instructions in the 
literature accompanying the appliance.

The model number and serial number of this product can be 
found on either the back or the bottom of the unit.
Please note them in the space provided below and keep for 
future reference.

MODEL NUMBER 

SERIAL NUMBER 

Product identification marking is located on the bottom of unit.

The unit should be installed near an accessible AC power 
outlet, with the power cord connected directly to it.
To completely disconnect power from the unit, unplug the 
power cord from the AC power outlet.

SC-HC05

Check and identify the supplied accessories.
Use numbers indicated in parentheses when asking for 
replacement parts. (Product numbers correct as of January 
2011. This may be subject to change.)

(Battery is already installed in the remote control.)

1. Damage requiring service — The unit should be serviced 

by qualified service personnel if:

  (a) The AC power supply cord or the plug has been 

damaged; or

  (b) Objects or liquids have gotten into the unit; or
  (c) The unit has been exposed to rain; or
  (d) The unit does not operate normally or exhibits a marked 

change in performance; or

  (e) The unit has been dropped or the cabinet damaged.

2. Servicing — Do not attempt to service the unit beyond that 

described in these operating instructions. Refer all other 
servicing to authorized servicing personnel.

Preparation
Update your iPod or iPhone with the latest software.
Make sure to remove the iPod or iPhone from its case.

Push [x, iPod] to open the dock.

Connect the iPod or iPhone.
The status indicator changes to green.

Hold the dock when connecting or disconnecting the iPod 
or iPhone.

Note:
• Make sure to align your iPod or iPhone with the connector 

when inserting.

• Make sure to press [PUSH CLOSE] while closing the dock to 

prevent damage.

• When an iPod or iPhone is connected, press [SELECTOR] 

to switch between modes (Internet radio, Bluetooth

®

, AUX or 

iPod).

• The system automatically switches on when you connect an 

iPod or iPhone that is in playback mode (except for some 
models).

• To purchase a dock adapter, consult your local iPod or 

iPhone dealer.

iPhone
(not included)

Dock adapter
(not included)

The system automatically switches off if there is no audio input 
and you do not use it for approximately 30 minutes.

Press [SELECTOR] to select AUX mode.
Status indicator: Off

 (default)

ON  : The light blue status indicator blinks 2 times.
OFF : The light blue status indicator blinks 1 time.

3. Replacement parts — When parts need replacing ensure 

the servicer uses parts specified by the manufacturer or 
parts that have the same characteristics as the original 
parts. Unauthorized substitutes may result in fire, electric 
shock, or other hazards.

4. Safety check — After repairs or service, ask the servicer 

to perform safety checks to confirm that the unit is in proper 
working condition.

For product information or assistance with product operation:
Refer to “Customer Services Directory (United States and 
Puerto Rico)”.

Press [4/9] to start playback.

Pause playback

Press [4/9].
Press again to continue playback.

Skip track

Press [2] or [6].

Search track

Press and hold [2] or [6].

View the iPod or 
iPhone menu

Press [iPod MENU].

Select an item

Press [R] or [T] and then press 
[OK].

Note:
• Depending on the model, it may be necessary to remove the 

iPod or iPhone and select the album, artist, etc. on the iPod 
or iPhone.

• Operation results may vary depending on the iPod or iPhone 

models.

• Read the User Guide of the iPod or iPhone for operating 

instructions.

• iPod touch 4th generation (8GB, 32GB, 64GB)
• iPod nano 6th generation (8GB, 16GB)
• iPod touch 3rd generation (32GB, 64GB) 
• iPod nano 5th generation (video camera) (8GB, 16GB)
• iPod touch 2nd generation (8GB, 16GB, 32GB)
• iPod classic [120GB, 160GB (2009)]
• iPod nano 4th generation (video) (8GB, 16GB)
• iPod classic (160GB) (2007)
• iPod touch 1st generation (8GB, 16GB, 32GB)
• iPod nano 3rd generation (video) (4GB, 8GB)
• iPod classic (80GB)
• iPod nano 2nd generation (aluminum) (2GB, 4GB, 8GB)
• iPod 5th generation (video) (60GB, 80GB)
• iPod 5th generation (video) (30GB)
• iPod nano 1st generation (1GB, 2GB, 4GB)
• iPhone 4 (16GB, 32GB)
• iPhone 3GS (8GB, 16GB, 32GB)
• iPhone 3G (8GB, 16GB)
• iPhone (4GB, 8GB, 16GB)

Compatibility depends on the software version of your iPod or 
iPhone.

Note:
• The display on the iPod can show differently because of the 

compatibility of the iPod models.

• All phone features can only be controlled by the touch 

screen of the iPhone.

• The system does not show incoming calls or the phone 

status.

• Playback will stop when there is an incoming call. 

Disconnect the iPhone to answer the call.

• A call is not canceled when you connect or disconnect the 

iPhone from the system.

• There is no Apple Inc. specification that will guarantee the 

above iPhone response. iPhone responses can be different 
on newer models or with newer software.

An iPod or iPhone is charged automatically when connected 
to the system (even when the system is in standby mode).
• See the iPod or iPhone display for its battery charging 

status.

• Disconnect the iPod or iPhone if it is not used for an 

extended period of time after charging is complete. 

• Charging stops when the battery is fully charged. The battery 

will deplete naturally.

Note:
• This function does not work when a Bluetooth

®

 device is 

connected.

• 1 minute before the system switches off, the power indicator 

blinks.

• The setting returns to the default when you disconnect the 

AC power supply cord.

A  Standby/on switch [`], [1, POWER]

Press to switch the unit from on to standby mode or vice 
versa.
In standby mode, the unit is still consuming a small 
amount of power.

B  View the iPod or iPhone menu

C  Select an item

D  Confirm a selection

Set or cancel the auto off function

E  Select iPod, Internet radio, Bluetooth

®

 or AUX mode

Bluetooth

®

 is the default mode except when an iPod or 

iPhone is connected.

F  Start Bluetooth

®

 pairing mode

Select Bluetooth

®

 link mode

Adjust the audio input level in AUX mode

G  Adjust the volume of the system

The setting returns to the default when you disconnect the 
AC power supply cord.

H  Mute the sound of the system

In iPod mode 

: The light blue and green status 

indicators blink alternately.

In Bluetooth

®

 mode : The light blue and blue status 

indicators blink alternately.

In AUX mode 

: The light blue status indicator blinks 

continuously.

This function does not work when the system is pairing or 
waiting to connect with a Bluetooth

®

 device.

Press the button again to cancel.
Mute is also canceled when you adjust the volume or 
when you switch off the system.

You can listen to a radio station on the Internet if you install 
the “vTuner for Panasonic” application on your iPod touch or 
iPhone. Download this application from the App Store.

Note:
For compatible iPod touch and iPhone models and 
instructions on how to use the “vTuner for Panasonic” 
application, refer to:
http://radio.vtuner.com/panasonic/en/

Preparation
Install “vTuner for Panasonic” on your iPod touch or iPhone.
Connect your iPod touch or iPhone to the Internet. Go to the 
Home screen of the iPod touch or iPhone.

I  Start or pause playback

J  Skip or search track

K  Power indicator

On  : The system is on
Off : The system is in standby mode

L  iPod or iPhone dock

M  Status indicator

Green 

: iPod mode

Blue : 

Bluetooth

®

 mode

Light blue  : Set or cancel the auto off function
 

 Mute function is on

Off 

: AUX mode

The green status indicator blinks each time a remote 
control button is pressed.

N  [PUSH CLOSE] 

Press while closing the dock.

O  Remote control sensor

Point the remote control at the remote control sensor, 
away from obstacles, at a maximum range of 7 m (23 ft) 
directly in front of the main unit.

  Front Ch (both ch driven)

     

20 W per channel (6  ), 1 kHz, 10% THD

  Total RMS stereo mode power 

40 W

  Front Ch (both ch driven)

     

15 W per channel (6  ), 20 Hz to 20 kHz, 10% THD

  Total FTC stereo mode power 

30 W

  Terminal 

Stereo, 3.5 mm (

1

/

8

″) jack

2 way, 2 speaker system (passive radiator)

  Woofer 

6.5 cm (2 

1

/

2

″) cone type x 1/ch

  Tweeter 

1.5 cm (

5

/

8

″) piezo type x 1/ch

  Passive radiators 

8 cm (3 

1

/

8

″) x 2/ch

6 

Ver. 2.1 + EDR

Class 2 (2.5 mW)

A2DP, AVRCP

     

2402 MHz to 2480 MHz (Adaptive Frequency Hopping)

10 m (33 ft) line of sight

     

(iPhone 4, at height 1 m (3.3 ft), in MODE 1)

AC 120 V, 60 Hz

16 W

370 mm x 176 mm x 85 mm

   

(14 

1

/

2

″ x 7″ x 3 

1

/

2

″)

     

[D = 121 mm (4 

3

/

4

″) dock open]

     

[D = 59 mm (2 

1

/

2

″) without stand]

1.8 kg (9 lb.)

0°C to +40°C

     

(+32°F to +104°F)

     

35% to 80% RH (no condensation)

Note:
1. Specifications are subject to change without notice.
  Mass and dimensions are approximate.
2. Total harmonic distortion is measured by the digital 

spectrum analyzer.

Before using
Remove the insulation sheet before you use the remote 
control for the first time.

Replacing the battery
Replace the remote control battery when it stops operating 
or when the range is decreased. Replace with a new battery 
(CR2025) only.

CAUTION!
• Insert with poles aligned.
• Do not touch the terminals (+ and –) with metal objects.
• Do not recharge, disassemble, remodel, heat or throw into 

fire.

• Keep out of reach of children.
• Do not heat or expose to flame.
• Do not leave the battery(ies) in an automobile exposed 

to direct sunlight for a long period of time with doors and 
windows closed.

• Remove the battery if you do not use the remote control for 

a long period of time. Keep in a cool, dark area.

If any electrolyte should come into contact with your hands or 
clothes, wash it off thoroughly with water.
If any electrolyte should come into contact with your eyes, 
never rub the eyes.
Rinse eyes thoroughly with water, and then consult a doctor.

Insulation sheet

Stopper

Battery holder

 

• Use the included AC power supply cord with this system 

only.

• Do not use an AC power supply cord from other equipment.

Conserving power
The system consumes approximately 0.1 W when it is in 
standby mode. Disconnect the power supply if you do not use 
the system. Some settings will be lost after you disconnect the 
system. You have to set them again.

• Do not remove the speaker nets.
• These speakers do not have magnetic shielding. Do not put 

them near TVs, PCs or other devices easily influenced by 
magnetism.

• When you play at high levels for a long period, it can cause 

damage to the system and decrease the life of the system.

• Decrease the volume when you play distorted sound to 

prevent damage.

To household AC outlet

To clean this system, wipe with a soft, dry cloth.
• Never use alcohol, paint thinner or benzine to clean this system.
• Before using chemically treated cloth, read the instructions that came with the cloth carefully.

HC05_P2_us_le.indd   1

HC05_P2_us_le.indd   1

3/15/2011   8:45:37 AM

3/15/2011   8:45:37 AM